Re: [PATCH 7/9] i8k: Autodetect fan RPM multiplier

[Guenter Roeck]

On 01/12/2015 05:32 AM, Pali RohÃr wrote:
> This patch adds new function i8k_get_fan_nominal_speed() for doing SMM call
> which will return nominal fan RPM for specified fan speed. It returns nominal
> RPM value at which fan operate when speed (0, 1, 2, 3) is set. It looks like
> RPM value is not accurate, but still provides very useful information.
>
> New function i8k_get_fan_nominal_speed() is used for determinate if fan
> multiplier is 1 or 30. If function for maximal fan value success and returned
> RPM value too high (above 30000) then fan multiplier is set to 1. Otherwise
> multiplier is not changed and default value 30 is used.
>
> Signed-off-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
> Tested-by: Pali RohÃr <pali.rohar@xxxxxxxxx>
> Tested-by: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

Greg,

with this the entire series is ready to go.

Thanks, and sorry for the long delay on my side.

Guenter

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/