Re: [PATCH] Documentation: gpio: fix bindings document

[Laurent Pinchart]

Hi Yamada-san,

Thank you for the patch.

On Thursday 15 January 2015 17:52:40 Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada <yamada.m@xxxxxxxxxxxxxxxx>

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> 
>  Documentation/devicetree/bindings/gpio/gpio.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt
> b/Documentation/devicetree/bindings/gpio/gpio.txt index b9bd1d6..f7a158d
> 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio.txt
> @@ -69,7 +69,8 @@ GPIO pin number, and GPIO flags as accepted by the
> "qe_pio_e" gpio-controller. ----------------------------------
> 
>  A gpio-specifier should contain a flag indicating the GPIO polarity;
> active- -high or active-low. If it does, the follow best practices should
> be followed: +high or active-low. If it does, the following best practices
> should be +followed:
> 
>  The gpio-specifier's polarity flag should represent the physical level at
> the GPIO controller that achieves (or represents, for inputs) a logically
> asserted @@ -147,7 +148,7 @@ contains information structures as follows:
>  	numeric-gpio-range ::=
>  			<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
>  	named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
> -	gpio-phandle : phandle to pin controller node.
> +	pinctrl-phandle : phandle to pin controller node
>  	gpio-base : Base GPIO ID in the GPIO controller
>  	pinctrl-base : Base pinctrl pin ID in the pin controller
>  	count : The number of GPIOs/pins in this range

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/