Re: [PATCH 00/16] PCI generic configuration space accessors

[Bjorn Helgaas]

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/