Re: [PATCH v4 0/7] clk: Add common clock support for Mediatek MT8135 and MT8173.

[Matthias Brugger]

2015-02-06 11:30 GMT+01:00 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>:
> On Thu, Feb 05, 2015 at 06:24:54PM +0100, Matthias Brugger wrote:
>> Hi Henry,
>>
>> 2015-01-30 6:13 GMT+01:00 Henry Chen <henryc.chen@xxxxxxxxxxxx>:
>> > This patchset contains the initial common clock support for Mediatek SoCs.
>> > Mediatek SoC's clock architecture comprises of various PLLs, dividers, muxes and clock gates.
>> >
>> > This patchset also contains a basic clock support for Mediatek MT8135 and MT8173.
>> >
>> > This driver is based on 3.19-rc1 + MT8135 and MT8173 basic support.
>> >
>> > Changes in v2:
>> > - Re-ordered patchset. Fold include/dt-bindings and DT document in 1st patch.
>> >
>> > Changes in v3:
>> > - Rebase to 3.19-rc1.
>> > - Refine code. Remove unneed functions, debug logs and comments, and fine tune error logs.
>> >
>> > Changes in v4:
>> > - Support MT8173 platform.
>> > - Re-ordered patchset. driver/clk/Makefile in 2nd patch.
>> > - Extract the common part definition(mtk_gate/mtk_pll/mtk_mux) from clk-mt8135.c/clk-mt8173.c to clk-mtk.c.
>> > - Refine code. Rmove unnessacary debug information and unsed defines, add prefix "mtk_" for static functions.
>> > - Remove flag CLK_IGNORE_UNUSED and set flag CLK_SET_RATE_PARENT on gate/mux/fixed-factor.
>> > - Use spin_lock_irqsave(&clk_ops_lock, flags) instead of mtk_clk_lock.
>> > - Example above include a node for the clock controller itself, followed by the i2c controller example above.
>>
>> You use pericfg and infracfg which will be used by other drivers as
>> well. So please use syscon for this driver. As it is no longer a
>> platform device it is present early in boot.
>> The changes should look something like the patch beneath. Please
>> beware that it does only show the general concept and may not even
>> compile. I asked Sascha to implement the reset controller as part of
>> the clk driver, as the registers addresses are mixed between both,
>> clock and reset controller. Please coordinate with him to get them
>> integrated (even as one series or as incremental series).
>
> I don't really understand the "as part of the clk driver part". I now
> have replaced the devm_regmap_init_mmio with syscon_node_to_regmap
> in the pericfg / infracfg drivers. Is that all that you want or do you
> want me to move the source code to drivers/clk/mediatek?

Yes, I propose to move the source code to drivers/clk/mediatek.
Please have a look on other clock drivers which implement the reset
controller, e.g. rockchip.

Thanks,
Matthias

>
> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



-- 
motzblog.wordpress.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/