Re: [PATCH 2/2] gpio: pcf857x: Propagate wake-up setting to parent irq controller

[Linus Walleij]

On Thu, Feb 5, 2015 at 4:49 PM, Geert Uytterhoeven
<geert+renesas@xxxxxxxxx> wrote:

> The pcf857x GPIO and interrupt controller uses dummy_irq_chip, which
> does not implement irq_chip.irq_set_wake() and does not set
> IRQCHIP_SKIP_SET_WAKE.
>
> This causes two s2ram issues if wake-up is enabled for the pcf857x GPIO
> pins:
>   1. During resume from s2ram, the following warning is printed:
>
>      WARNING: CPU: 0 PID: 1046 at kernel/irq/manage.c:537 irq_set_irq_wake+0x9c/0xf8()
>      Unbalanced IRQ 113 wake disable
>
>   2. Wake-up through the pcf857x GPIO pins may fail, as the parent
>      interrupt controller may be suspended.
>
> Migrate the pcf857x GPIO and interrupt controller from dummy_irq_chip to
> its own irq_chip. This irq chip implements irq_chip.irq_set_wake() to
> propagate its wake-up setting to the parent interrupt controller.
>
> This fixes wake-up through gpio-keys on sh73a0/kzm9g, where the pcf857x
> interrupt is cascaded to irq-renesas-intc-irqpin, and the latter must
> not be suspended when wake-up is enabled.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> v2:
>   - Rebased on top of "gpio: pcf857x: Switch to use gpiolib irqchip
>     helpers".

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/