Re: [PATCH 3.18 129/151] x86/xen: Treat SCI interrupt as normal GSI interrupt

From: Stefan Bader
Date: Wed Mar 04 2015 - 07:52:21 EST


On 04.03.2015 07:14, Greg Kroah-Hartman wrote:
> 3.18-stable review patch. If anyone has any objections, please let me know.

I thought I replied earlier today but I cannot seem to find it coming back via
the mailing list. Hope this is not duplicating too much... There was a
regression with that patch and it requires the below commit as well to prevent that:

commit 1ea76fbadd667b19c4fa4466f3a3b55a505e83d9
Author: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
Date: Mon Feb 16 10:11:13 2015 +0800

x86/irq: Fix regression caused by commit b568b8601f05

Commit b568b8601f05 ("Treat SCI interrupt as normal GSI interrupt")
accidently removes support of legacy PIC interrupt when fixing a
regression for Xen, which causes a nasty regression on HP/Compaq
nc6000 where we fail to register the ACPI interrupt, and thus
lose eg. thermal notifications leading a potentially overheated
machine.

-Stefan


>
> ------------------
>
> From: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
>
> commit b568b8601f05a591a7ff09d8ee1cedb5b2e815fe upstream.
>
> Currently Xen Domain0 has special treatment for ACPI SCI interrupt,
> that is initialize irq for ACPI SCI at early stage in a special way as:
> xen_init_IRQ()
> ->pci_xen_initial_domain()
> ->xen_setup_acpi_sci()
> Allocate and initialize irq for ACPI SCI
>
> Function xen_setup_acpi_sci() calls acpi_gsi_to_irq() to get an irq
> number for ACPI SCI. But unfortunately acpi_gsi_to_irq() depends on
> IOAPIC irqdomains through following path
> acpi_gsi_to_irq()
> ->mp_map_gsi_to_irq()
> ->mp_map_pin_to_irq()
> ->check IOAPIC irqdomain
>
> For PV domains, it uses Xen event based interrupt manangement and
> doesn't make uses of native IOAPIC, so no irqdomains created for IOAPIC.
> This causes Xen domain0 fail to install interrupt handler for ACPI SCI
> and all ACPI events will be lost. Please refer to:
> https://lkml.org/lkml/2014/12/19/178
>
> So the fix is to get rid of special treatment for ACPI SCI, just treat
> ACPI SCI as normal GSI interrupt as:
> acpi_gsi_to_irq()
> ->acpi_register_gsi()
> ->acpi_register_gsi_xen()
> ->xen_register_gsi()
>
> With above change, there's no need for xen_setup_acpi_sci() anymore.
> The above change also works with bare metal kernel too.
>
> Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
> Tested-by: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
> Cc: Tony Luck <tony.luck@xxxxxxxxx>
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Cc: David Vrabel <david.vrabel@xxxxxxxxxx>
> Cc: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx>
> Cc: Len Brown <len.brown@xxxxxxxxx>
> Cc: Pavel Machek <pavel@xxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Link: http://lkml.kernel.org/r/1421720467-7709-2-git-send-email-jiang.liu@xxxxxxxxxxxxxxx
> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Signed-off-by: Stefan Bader <stefan.bader@xxxxxxxxxxxxx>
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>
> ---
> arch/x86/kernel/acpi/boot.c | 21 ++++++++++---------
> arch/x86/pci/xen.c | 47 --------------------------------------------
> 2 files changed, 11 insertions(+), 57 deletions(-)
>
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -604,18 +604,19 @@ void __init acpi_pic_sci_set_trigger(uns
>
> int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
> {
> - int irq;
> + int rc, irq, trigger, polarity;
>
> - if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
> - *irqp = gsi;
> - } else {
> - irq = mp_map_gsi_to_irq(gsi,
> - IOAPIC_MAP_ALLOC | IOAPIC_MAP_CHECK);
> - if (irq < 0)
> - return -1;
> - *irqp = irq;
> + rc = acpi_get_override_irq(gsi, &trigger, &polarity);
> + if (rc == 0) {
> + trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
> + polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> + irq = acpi_register_gsi(NULL, gsi, trigger, polarity);
> + if (irq >= 0) {
> + *irqp = irq;
> + return 0;
> + }
> }
> - return 0;
> + return -1;
> }
> EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
>
> --- a/arch/x86/pci/xen.c
> +++ b/arch/x86/pci/xen.c
> @@ -452,52 +452,6 @@ int __init pci_xen_hvm_init(void)
> }
>
> #ifdef CONFIG_XEN_DOM0
> -static __init void xen_setup_acpi_sci(void)
> -{
> - int rc;
> - int trigger, polarity;
> - int gsi = acpi_sci_override_gsi;
> - int irq = -1;
> - int gsi_override = -1;
> -
> - if (!gsi)
> - return;
> -
> - rc = acpi_get_override_irq(gsi, &trigger, &polarity);
> - if (rc) {
> - printk(KERN_WARNING "xen: acpi_get_override_irq failed for acpi"
> - " sci, rc=%d\n", rc);
> - return;
> - }
> - trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
> - polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> -
> - printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
> - "polarity=%d\n", gsi, trigger, polarity);
> -
> - /* Before we bind the GSI to a Linux IRQ, check whether
> - * we need to override it with bus_irq (IRQ) value. Usually for
> - * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
> - * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> - * but there are oddballs where the IRQ != GSI:
> - * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
> - * which ends up being: gsi_to_irq[9] == 20
> - * (which is what acpi_gsi_to_irq ends up calling when starting the
> - * the ACPI interpreter and keels over since IRQ 9 has not been
> - * setup as we had setup IRQ 20 for it).
> - */
> - if (acpi_gsi_to_irq(gsi, &irq) == 0) {
> - /* Use the provided value if it's valid. */
> - if (irq >= 0)
> - gsi_override = irq;
> - }
> -
> - gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
> - printk(KERN_INFO "xen: acpi sci %d\n", gsi);
> -
> - return;
> -}
> -
> int __init pci_xen_initial_domain(void)
> {
> int irq;
> @@ -509,7 +463,6 @@ int __init pci_xen_initial_domain(void)
> x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
> x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
> #endif
> - xen_setup_acpi_sci();
> __acpi_register_gsi = acpi_register_gsi_xen;
> /* Pre-allocate legacy irqs */
> for (irq = 0; irq < nr_legacy_irqs(); irq++) {
>
>


Attachment: signature.asc
Description: OpenPGP digital signature