Re: [alsa-devel] [RFC PATCH 00/14] ASoC: qcom: add support to apq8016 audio
From: Srinivas Kandagatla
Date: Tue May 12 2015 - 09:12:07 EST
Hi Kenneth,
On 12/05/15 05:06, Kenneth Westfield wrote:
On Tue, May 05, 2015 at 11:54:16PM -0700, Srinivas Kandagatla wrote:
Hi Kenneth,
On 06/05/15 06:47, Kenneth Westfield wrote:
I will test the patches and let you know by Wednesday. Also, I posted
some comments, but Patrick should be posting his comments separately
later next week.
Srinivas,
After applying the patches, audio playback is no longer functional on
the storm board. Give me some time to debug this and I will get back
to you.
I found atleast one issue with rdma audif bits in ipq806x lpass
could you try change, this will be fixed properly in next version.
-----------------------><---------------------------------------------
diff --git a/sound/soc/qcom/lpass-ipq806x.c
b/sound/soc/qcom/lpass-ipq806x.c
index 11a7053..2b00355 100644
--- a/sound/soc/qcom/lpass-ipq806x.c
+++ b/sound/soc/qcom/lpass-ipq806x.c
@@ -69,6 +69,7 @@ struct lpass_variant ipq806x_data = {
.rdma_reg_base = 0x6000,
.rdma_reg_stride = 0x1000,
.rdma_channels = 4,
+ .rdmactl_audif_start = 4,
.dai_driver = &lpass_cpu_dai_driver,
.num_dai = 1,
-----------------------><---------------------------------------------
Srinivas,
I was able to get audio working on the Storm board. There were several
issues. First, the I2S control port was saved in the DAI driver id field
(which was 4), but the DAI id field was used by the macro (which was 0).
The patch below fixed it:
-----------------------><---------------------------------------------
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 17ad20d..58ae8af 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -146,7 +146,7 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
}
ret = regmap_write(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
regval);
if (ret) {
dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
@@ -171,7 +171,7 @@ static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
int ret;
ret = regmap_write(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id), 0);
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id), 0);
if (ret)
dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
__func__, ret);
@@ -186,7 +186,7 @@ static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
int ret;
ret = regmap_update_bits(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
LPAIF_I2SCTL_SPKEN_MASK, LPAIF_I2SCTL_SPKEN_ENABLE);
if (ret)
dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
@@ -206,7 +206,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = regmap_update_bits(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
LPAIF_I2SCTL_SPKEN_MASK,
LPAIF_I2SCTL_SPKEN_ENABLE);
if (ret)
@@ -217,7 +217,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = regmap_update_bits(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
LPAIF_I2SCTL_SPKEN_MASK,
LPAIF_I2SCTL_SPKEN_DISABLE);
if (ret)
@@ -247,7 +247,7 @@ int lpass_cpu_dai_probe(struct snd_soc_dai *dai)
/* ensure audio hardware is disabled */
ret = regmap_write(drvdata->lpaif_map,
- LPAIF_I2SCTL_REG(drvdata->variant, dai->id), 0);
+ LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id), 0);
if (ret)
dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
__func__, ret);
-----------------------><---------------------------------------------
In addition to your patch above, I also needed to correct the rdma_port
assignment by removing the i2s port reference:
-----------------------><---------------------------------------------
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index c5907d5..580cae1 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -91,7 +91,7 @@ static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream,
unsigned int channels = params_channels(params);
unsigned int regval;
int bitwidth;
- int ret, rdma_port = pcm_data->i2s_port + v->rdmactl_audif_start;
+ int ret, rdma_port = v->rdmactl_audif_start;
bitwidth = snd_pcm_format_width(format);
if (bitwidth < 0) {
-----------------------><---------------------------------------------
Please incorporate these fixes into your next patch series.
I think my patch and above change for rdma port are not necessary as the
rdma_port existing calculation would result 4 anyway, for
rdmactl_audif_start= 0 and dai->driver->id = 4. Which is correct in MI2S
case.
Only replacing dai->id to dai->driver->id should fix the issue on storm
board. So I will drop these two changes in next verion.
--srini
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/