[PATCH] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting

[Gregory CLEMENT]

From: Nadav Haklai <nadavh@xxxxxxxxxxx>

According to the Armada 38x datasheet, the window base address
registers value is set in bits [31:4] of the register and corresponds
to the transaction address bits [47:20].

Therefore, the 32bit base address value should be shifted right by
20bits and left by 4bits, resulting in 16 bit shift right.

The bug as not been noticed yet because if the memory available on
the platform is less than 2GB, then the base address is zero.

[gregory.clement@xxxxxxxxxxxxxxxxxx: add extra-explanation]

Fixes: a3464ed2f14 (ata: ahci_mvebu: new driver for Marvell Armada 380
AHCI interfaces)
Signed-off-by: Nadav Haklai <nadavh@xxxxxxxxxxx>
Reviewed-by: Omri Itach <omrii@xxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
 drivers/ata/ahci_mvebu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 23716dd8a7ec..5928d0746a27 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -45,7 +45,7 @@ static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv,
 		writel((cs->mbus_attr << 8) |
 		       (dram->mbus_dram_target_id << 4) | 1,
 		       hpriv->mmio + AHCI_WINDOW_CTRL(i));
-		writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i));
+		writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
 		writel(((cs->size - 1) & 0xffff0000),
 		       hpriv->mmio + AHCI_WINDOW_SIZE(i));
 	}
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/