[PATCH v4 2/2] arm64: dts: mt8173: Add I2C device node

From: Eddie Huang
Date: Wed Jun 17 2015 - 11:08:52 EST


Add MT8173 I2C device nodes, include I2C controllers and pins.
MT8173 has six I2C controllers, from i2c0 to i2c6, exclude i2c5.
The 6th I2C controller register base doesn't next to 5th I2C,
and there is a hardware between 5th and 6th I2C controller. So
SoC designer name 6th controller as "i2c6", not "i2c5".

Signed-off-by: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 144 +++++++++++++++++++++++++++++++
1 file changed, 144 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index b52ec43..1816c8f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -158,6 +158,54 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins_a: i2c0 {
+ pins1 {
+ pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
+ <MT8173_PIN_46_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1 {
+ pins1 {
+ pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
+ <MT8173_PIN_126_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2 {
+ pins1 {
+ pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
+ <MT8173_PIN_44_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
+ i2c3_pins_a: i2c3 {
+ pins1 {
+ pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
+ <MT8173_PIN_107_SCL3__FUNC_SCL3>;
+ bias-disable;
+ };
+ };
+
+ i2c4_pins_a: i2c4 {
+ pins1 {
+ pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
+ <MT8173_PIN_134_SCL4__FUNC_SCL4>;
+ bias-disable;
+ };
+ };
+
+ i2c6_pins_a: i2c6 {
+ pins1 {
+ pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
+ <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
+ bias-disable;
+ };
+ };
};

watchdog: watchdog@10007000 {
@@ -229,6 +277,102 @@
clocks = <&uart_clk>;
status = "disabled";
};
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c3@11010000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11010000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C3>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c4@11011000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11011000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C4>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c6@11013000 {
+ compatible = "mediatek,mt8173-i2c";
+ reg = <0 0x11013000 0 0x70>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C6>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};

};
--
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/