Re: [PATCH] ddr: Use less generic identifiers
From: Richard Weinberger
Date: Sat Jun 20 2015 - 16:46:20 EST
Am 04.05.2015 um 20:44 schrieb Richard Weinberger:
> Am 04.01.2015 um 16:48 schrieb Richard Weinberger:
>> At least on UML this identifiers clash with register names.
>> Use something less generic than Rx, Cx and Cx.
>>
>> CC lib//jedec_ddr_data.o
>> In file included from ./arch/um/include/asm/ptrace-generic.h:11:0,
>> from ./arch/x86/um/asm/ptrace.h:8,
>> from ./arch/x86/include/asm/alternative.h:8,
>> from ./arch/x86/include/asm/bitops.h:16,
>> from include/linux/bitops.h:36,
>> from include/linux/kernel.h:10,
>> from include/linux/list.h:8,
>> from include/linux/module.h:9,
>> from lib//jedec_ddr_data.c:14:
>> ./arch/x86/include/uapi/asm/ptrace-abi.h:28:0: warning: "R15" redefined [enabled by default]
>> #define R15 0
>>
>> Signed-off-by: Richard Weinberger <richard@xxxxxx>
>> ---
>> Please note that this patch is untested.
>>
>> Thanks,
>> //richard
>> ---
>> drivers/memory/emif.c | 4 ++--
>> include/memory/jedec_ddr.h | 36 ++++++++++++++++++------------------
>> lib/jedec_ddr_data.c | 20 ++++++++++----------
>> 3 files changed, 30 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
>> index 04644e7..e0aa09f 100644
>> --- a/drivers/memory/emif.c
>> +++ b/drivers/memory/emif.c
>> @@ -439,7 +439,7 @@ static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
>> val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
>> tim1 |= val << T_WTR_SHIFT;
>>
>> - if (addressing->num_banks == B8)
>> + if (addressing->num_banks == DDR_BANK_8)
>> val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
>> else
>> val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
>> @@ -476,7 +476,7 @@ static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
>> * tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
>> * to tFAW for de-rating
>> */
>> - if (addressing->num_banks == B8) {
>> + if (addressing->num_banks == DDR_BANK_8) {
>> val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
>> } else {
>> val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
>> diff --git a/include/memory/jedec_ddr.h b/include/memory/jedec_ddr.h
>> index ddad0f8..39144d0 100644
>> --- a/include/memory/jedec_ddr.h
>> +++ b/include/memory/jedec_ddr.h
>> @@ -40,28 +40,28 @@
>> #define DDR_IO_WIDTH_32 4
>>
>> /* Number of Row bits */
>> -#define R9 9
>> -#define R10 10
>> -#define R11 11
>> -#define R12 12
>> -#define R13 13
>> -#define R14 14
>> -#define R15 15
>> -#define R16 16
>> +#define DDR_ROW_9 9
>> +#define DDR_ROW_10 10
>> +#define DDR_ROW_11 11
>> +#define DDR_ROW_12 12
>> +#define DDR_ROW_13 13
>> +#define DDR_ROW_14 14
>> +#define DDR_ROW_15 15
>> +#define DDR_ROW_16 16
>>
>> /* Number of Column bits */
>> -#define C7 7
>> -#define C8 8
>> -#define C9 9
>> -#define C10 10
>> -#define C11 11
>> -#define C12 12
>> +#define DDR_COL_7 7
>> +#define DDR_COL_8 8
>> +#define DDR_COL_9 9
>> +#define DDR_COL_10 10
>> +#define DDR_COL_11 11
>> +#define DDR_COL_12 12
>>
>> /* Number of Banks */
>> -#define B1 0
>> -#define B2 1
>> -#define B4 2
>> -#define B8 3
>> +#define DDR_BANK_1 0
>> +#define DDR_BANK_2 1
>> +#define DDR_BANK_4 2
>> +#define DDR_BANK_8 3
>>
>> /* Refresh rate in nano-seconds */
>> #define T_REFI_15_6 15600
>> diff --git a/lib/jedec_ddr_data.c b/lib/jedec_ddr_data.c
>> index 6d2cbf1..2181be4 100644
>> --- a/lib/jedec_ddr_data.c
>> +++ b/lib/jedec_ddr_data.c
>> @@ -16,16 +16,16 @@
>> /* LPDDR2 addressing details from JESD209-2 section 2.4 */
>> const struct lpddr2_addressing
>> lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES] = {
>> - {B4, T_REFI_15_6, T_RFC_90}, /* 64M */
>> - {B4, T_REFI_15_6, T_RFC_90}, /* 128M */
>> - {B4, T_REFI_7_8, T_RFC_90}, /* 256M */
>> - {B4, T_REFI_7_8, T_RFC_90}, /* 512M */
>> - {B8, T_REFI_7_8, T_RFC_130}, /* 1GS4 */
>> - {B8, T_REFI_3_9, T_RFC_130}, /* 2GS4 */
>> - {B8, T_REFI_3_9, T_RFC_130}, /* 4G */
>> - {B8, T_REFI_3_9, T_RFC_210}, /* 8G */
>> - {B4, T_REFI_7_8, T_RFC_130}, /* 1GS2 */
>> - {B4, T_REFI_3_9, T_RFC_130}, /* 2GS2 */
>> + {DDR_BANK_4, T_REFI_15_6, T_RFC_90}, /* 64M */
>> + {DDR_BANK_4, T_REFI_15_6, T_RFC_90}, /* 128M */
>> + {DDR_BANK_4, T_REFI_7_8, T_RFC_90}, /* 256M */
>> + {DDR_BANK_4, T_REFI_7_8, T_RFC_90}, /* 512M */
>> + {DDR_BANK_8, T_REFI_7_8, T_RFC_130}, /* 1GS4 */
>> + {DDR_BANK_8, T_REFI_3_9, T_RFC_130}, /* 2GS4 */
>> + {DDR_BANK_8, T_REFI_3_9, T_RFC_130}, /* 4G */
>> + {DDR_BANK_8, T_REFI_3_9, T_RFC_210}, /* 8G */
>> + {DDR_BANK_4, T_REFI_7_8, T_RFC_130}, /* 1GS2 */
>> + {DDR_BANK_4, T_REFI_3_9, T_RFC_130}, /* 2GS2 */
>> };
>> EXPORT_SYMBOL_GPL(lpddr2_jedec_addressing_table);
>
> Ping?
>
*ping -f*
Thanks,
//richard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/