[PATCH 3.12 18/82] Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen

[Jiri Slaby]

From: Bernhard Bender <bernhard.bender@xxxxxxxxxxxx>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream.

This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30
touch screen.  Due to a missing delay between the RESET and SET_RATE
commands, the touch screen may become unresponsive during system startup or
driver loading.

According to the DMC documentation, a delay is needed after the RESET
command to allow the chip to complete its internal initialization. As this
delay is not guaranteed, we had a system where the touch screen
occasionally did not send any touch data. There was no other indication of
the problem.

The patch fixes the problem by adding a 150ms delay between the RESET and
SET_RATE commands.

Suggested-by: Jakob Mustafa <jakob.mustafa@xxxxxxxxxxxx>
Signed-off-by: Bernhard Bender <bernhard.bender@xxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
 drivers/input/touchscreen/usbtouchscreen.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index e565530e3596..5679cd9003cc 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -628,6 +628,9 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 		goto err_out;
 	}
 
+	/* TSC-25 data sheet specifies a delay after the RESET command */
+	msleep(150);
+
 	/* set coordinate output rate */
 	buf[0] = buf[1] = 0xFF;
 	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/