[PATCH v7 1/8] Documentation: add sbsa-gwdt.txt documentation

[fu . wei]

From: Fu Wei <fu.wei@xxxxxxxxxx>

The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for
introducing SBSA(Server Base System Architecture) Generic Watchdog
device node info into FDT.

Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
---
 .../devicetree/bindings/watchdog/sbsa-gwdt.txt     | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt
new file mode 100644
index 0000000..8b43640
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt
@@ -0,0 +1,32 @@
+* SBSA(Server Base System Architecture) Generic Watchdog
+
+The SBSA Generic Watchdog Timer is used for resetting the system after
+two stages of timeout.
+More details: ARM-DEN-0029 - Server Base System Architecture (SBSA)
+
+Required properties:
+- compatible : Should at least contain "arm,sbsa-gwdt".
+
+- reg : Specifies base physical address of the two register frames
+  and length of memory mapped region, order:
+  1: Watchdog control frame
+  2: Refresh frame.
+
+- interrupts : Should at least contain WS0 interrupt,
+  the WS1 interrupt is optional, order:
+  1: WS0 interrupt
+  2: WS1 interrupt
+
+Optional properties
+- timeout-sec : Watchdog pre-timeout and timeout values (in seconds).
+  The first is timeout values, then pre-timeout.
+
+Example for FVP Foundation Model v8:
+
+watchdog@2a440000 {
+	compatible = "arm,sbsa-gwdt";
+	reg = <0x0 0x2a440000 0 0x1000>,
+	      <0x0 0x2a450000 0 0x1000>;
+	interrupts = <0 27 4>;
+	timeout-sec = <10 5>;
+};
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/