Re: [PATCH v3] qcom: ipq40xx: Add basic board/dts support for IPQ40XX SoC

[Varadarajan Narayanan]

On Mon, Aug 24, 2015 at 03:49:28PM -0700, Stephen Boyd wrote:
> On 08/24, Varadarajan Narayanan wrote:
> > Add initial dts files and SoC support for IPQ40XX
> >
>
> So far we haven't added any Xs in the model names for our SoC
> support. Even for IPQ806X, we have it as IPQ8064 as the config
> name with IPQ806x in the help text because there's IPQ8062 out
> there. So I guess it should be IPQ4019 or something?

Will rename it as IPQ4019

> > Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
> > ---
> > diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt
> > new file mode 100644
> > index 0000000..7d56bd0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/qcom.txt
> > @@ -0,0 +1,16 @@
> > +Qualcomm IPQ device tree bindings
> > +---------------------------------
> > +
> > +System on Chip
> > +
> > +Device tree must specify which SoC it uses, with one of the
> > +following compatible strings
> > +
> > +       "qcom,ipq40xx"
> > +
> > +Platform
> > +
> > +Device tree must specify which Platform it uses, with one of the
> > +following compatible strings
> > +
> > +       "qcom,ipq40xx-r3pc"
>
> This file is not complete and I don't see any other silicon
> vendors doing this, so please drop the entire file.

Ok.

> > diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
> > new file mode 100644
> > index 0000000..7e4e629
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts
> > @@ -0,0 +1,33 @@
> > +/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include "qcom-ipq40xx.dtsi"
> > +
> > +/ {
> > +	model = "Qualcomm Technologies, Inc. IPQ40XX R3PC";
>
> Same here, we should know what model number is on the board.

Ok.

> > +	compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx";
> > +
> > +	memory {
> > +		device_type = "memory";
> > +		reg = <0x80000000 0x20000000>; /* 512MB */
> > +	};
>
> Doesn't the bootloader fill the memory node for us? Why do we
> need this?
>
> > +
> > +	chosen {
> > +		bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246";
> > +	};
>
> Please don't add bootargs. Use stdout-path for the console part
> and everything else should be done by the bootloader or is the
> defaults.

Since this is for the emulation platform, we don't have the bootloader.

> > +
> > +	soc {
> > +		serial@78b0000 {
> > +			status = "ok";
> > +		};
> > +	};
> > +};
> > diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
> > new file mode 100644
> > index 0000000..f572f38
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi
> > @@ -0,0 +1,81 @@
> > +/*
> > + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "skeleton.dtsi"
> > +
> > +/ {
> > +	model = "Qualcomm Technologies, Inc. IPQ40XX";
> > +	compatible = "qcom,ipq40xx";
>
> These two should also be specific and drop the Xs. Same goes for
> the file name.

Ok.

> > +	interrupt-parent = <&intc>;
> > +
> > +	cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a7";
> > +			reg = <0x0>;
> > +		};
> > +
> > +		cpu@1 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a7";
> > +			reg = <0x1>;
> > +		};
> > +
> > +		cpu@2 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a7";
> > +			reg = <0x2>;
> > +		};
> > +
> > +		cpu@3 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a7";
> > +			reg = <0x3>;
> > +		};
> > +	};
> > +
> > +	soc {
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges;
> > +		compatible = "simple-bus";
> > +
> > +		intc: interrupt-controller@b000000 {
> > +			compatible = "qcom,msm-qgic2";
> > +			interrupt-controller;
> > +			#interrupt-cells = <3>;
> > +			reg = <0x0b000000 0x1000>,
> > +			<0x0b002000 0x1000>;
> > +		};
> > +
> > +		timer {
>
> This node is not a child of the SoC node. It should be at the
> root level.

Ok.

> > +			compatible = "arm,armv7-timer";
> > +			interrupts = <1 2 0xf08>,
> > +				     <1 3 0xf08>,
> > +				     <1 4 0xf08>,
> > +				     <1 1 0xf08>;
> > +			clock-frequency = <20833333>;
>
> Drop this clock-frequency part if you can. The hardware should
> properly report the frequency.

Cannot drop this. This is the ref-clock frequency. For the
chip it is 48MHz, for emulation is ~20MHz. Similar to
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/qcom-msm8974.dtsi#n89

> > +		};
> > +
> > +		serial@78b0000 {
> > +			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > +			reg = <0x78b0000 0x200>;
> > +			interrupts = <0 108 0>;
> > +			status = "disabled";
>
> Don't you need some clocks here?

Yes, will get updated in subsequent patches.

> > +		};
> > +	};
> > +};
> > diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig
> > index 1cabd8b..89bf8ad 100644
> > --- a/arch/arm/configs/ipq_defconfig
> > +++ b/arch/arm/configs/ipq_defconfig
> > @@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y
> >  CONFIG_ARCH_MSM8X60=y
> >  CONFIG_ARCH_MSM8960=y
> >  CONFIG_ARCH_MSM8974=y
> > +CONFIG_ARCH_IPQ40XX=y
> >  CONFIG_ARCH_IPQ8064=y
> >  CONFIG_SMP=y
> >  CONFIG_PREEMPT=y
>
> This hunk should be in a separate patch.

Ok.

> > diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
> > index fab49a2..70812aa 100644
> > --- a/arch/arm/mach-qcom/Kconfig
> > +++ b/arch/arm/mach-qcom/Kconfig
> > @@ -22,6 +22,10 @@ config ARCH_MSM8974
> >  	bool "Enable support for MSM8974"
> >  	select HAVE_ARM_ARCH_TIMER
> >
> > +config ARCH_IPQ40XX
> > +	bool "Enable support for IPQ40XX"
> > +	select HAVE_ARM_ARCH_TIMER
> > +
> >  config ARCH_IPQ8064
> >  	bool "Enable support for IPQ806x"
> >  	select CLKSRC_QCOM
> > diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
> > index 6d8bbf7..af9e247 100644
> > --- a/arch/arm/mach-qcom/board.c
> > +++ b/arch/arm/mach-qcom/board.c
> > @@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = {
> >  	"qcom,apq8064",
> >  	"qcom,apq8074-dragonboard",
> >  	"qcom,apq8084",
> > +	"qcom,ipq40xx",
> >  	"qcom,ipq8062",
> >  	"qcom,ipq8064",
> >  	"qcom,msm8660-surf",
> >
>
> And these two should also go as a separate patch.

Ok.

Thanks
Varada

>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/