[PATCH v2 05/11] mmc: host: omap_hsmmc: set clk rate to the max frequency

From: Kishon Vijay Abraham I
Date: Tue Aug 25 2015 - 05:06:17 EST


Set the clock rate of the functional clock to the max frequency
that is passed to the driver either using pdata or dt.

Also remove unnecessary setting of host->fclk to NULL.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/mmc/host/omap_hsmmc.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7dac486..60c1ac2 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2149,6 +2149,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
struct omap_hsmmc_host *host = NULL;
struct resource *res;
int ret, irq;
+ unsigned int freq;
const struct of_device_id *match;
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
@@ -2229,10 +2230,20 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
host->fclk = devm_clk_get(&pdev->dev, "fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
- host->fclk = NULL;
goto err1;
}

+ freq = clk_get_rate(host->fclk);
+ if (freq > mmc->f_max) {
+ mmc->f_max = freq;
+ } else {
+ ret = clk_set_rate(host->fclk, mmc->f_max);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set clock to %d\n", mmc->f_max);
+ goto err1;
+ }
+ }
+
if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) {
dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n");
omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk;
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/