Re: [PATCH v9 1/1] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources

[Thomas Gleixner]

On Tue, 25 Aug 2015, Sudeep Holla wrote:
> On 25/08/15 15:54, Shenwei Wang wrote:
> > You don't really understand what happens after a driver calls
> > enable_irq_wake. In suspend state, even the interrupt
> > controller itself is powered off. How can you get the system up
> > again  by just using a SKIP_SET_WAKE.
> 
> Sorry for that, let me try to understand aloud. So you have
> irq_{un,}mask function that are called when interrupts are enabled and
> disabled. So suppose you have 3 irqs that are enabled and only one of
> then is set as wakeup source.
> 
> Now you call enable_irq_wake, you save that in wakeup_sources, fine.
> Later when you enter suspend, you save all the 3 active irqs in
> saved_irq_mask and over-write cpu2wakeup with wakeup_sources, right?
> 
> All fine, what I am saying is let irq-core know that you want to mask
> the 2 non-wakeup irqs you have using MASK_ON_SUSPEND. So when
> suspend_device_irqs is called in suspend path, that's done for you
> automatically and the cpu2wakeup will have just 1 wakeup enabled which
> is what you are doing in suspend callback, right ?

I missed that when I reviewed the patch. You are right, it can be
simplified.
 
> Now that it's already done for you, you need not do anything extra and
> hence just set SKIP_SET_WAKE to do nothing.

He still needs the set_wake function to capture the wake enabled
interrupts as they are handed over to the low level asm code via
imx_gpcv2_get_wakeup_source(). Though they could be read back from the
hw registers as well.

Thanks,

	tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/