[PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller

From: Sascha Hauer
Date: Thu Aug 27 2015 - 02:41:41 EST


Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
---
.../bindings/thermal/mediatek-thermal.txt | 38 ++++++++++++++++++++++
include/dt-bindings/thermal/mt8173.h | 13 ++++++++
2 files changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
create mode 100644 include/dt-bindings/thermal/mt8173.h

diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 0000000..1697375
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -0,0 +1,38 @@
+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC. Also it controls a mux in the
+apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+is also needed.
+
+Required properties:
+- compatible: "mediatek,mt8173-thermal"
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+ clocks are:
+ "therm": Main clock needed for register access
+ "auxadc": The AUXADC clock
+- resets: Reference to the reset controller controlling the thermal controller.
+- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
+- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. See
+ include/dt-bindings/thermal/mt8173.h for valid sensor
+ numbers.
+
+Example:
+
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt8173-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ };
diff --git a/include/dt-bindings/thermal/mt8173.h b/include/dt-bindings/thermal/mt8173.h
new file mode 100644
index 0000000..692e74c
--- /dev/null
+++ b/include/dt-bindings/thermal/mt8173.h
@@ -0,0 +1,13 @@
+/*
+ * This header provides constants for mediatek,mt8173-thermal
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H
+#define _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H
+
+#define MT8173_THERMAL_ZONE_CA53 0
+#define MT8173_THERMAL_ZONE_CA57 1
+#define MT8173_THERMAL_ZONE_GPU 2
+#define MT8173_THERMAL_ZONE_CORE 3
+
+#endif /* _DT_BINDINGS_THERMAL_MEDIATEK_MT8173_H */
--
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/