[PATCH v2 4/5] [media] c8sectpfe: Update binding to reset-gpios
From: Peter Griffin
Date: Thu Aug 27 2015 - 08:31:45 EST
gpio.txt documents that GPIO properties should be named
"[<name>-]gpios", with <name> being the purpose of this
GPIO for the device.
This change has been done as one atomic commit.
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 6 +++---
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index d4def76..e70d840 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -35,7 +35,7 @@ Required properties (tsin (child) node):
- tsin-num : tsin id of the InputBlock (must be between 0 to 6)
- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- rst-gpio : reset gpio for this tsin channel.
+- reset-gpios : reset gpio for this tsin channel.
Optional properties (tsin (child) node):
@@ -75,7 +75,7 @@ Example:
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 0>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
@@ -83,7 +83,7 @@ Example:
tsin-num = <3>;
serial-not-parallel;
i2c-bus = <&ssc3>;
- rst-gpio = <&pio15 7 0>;
+ reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMB_1>;
};
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index c014173..f932bfd 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -6,8 +6,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
soc {
@@ -115,7 +115,7 @@
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 0>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index 3a91093..c691e13 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -822,7 +822,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
}
of_node_put(i2c_bus);
- tsin->rst_gpio = of_get_named_gpio(child, "rst-gpio", 0);
+ tsin->rst_gpio = of_get_named_gpio(child, "reset-gpios", 0);
ret = gpio_is_valid(tsin->rst_gpio);
if (!ret) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/