Re: [RESEND PATCH v16 4/4] ARM: dts: add the support power-domain node on RK3288 SoCs

From: Doug Anderson
Date: Thu Aug 27 2015 - 22:03:26 EST


Kevin,

On Thu, Aug 27, 2015 at 5:24 PM, Kevin Hilman <khilman@xxxxxxxxxx> wrote:
>> That is not really workable: the attach and detach happen in
>> probe/remove path; if you do not have driver for the device you will
>> miss the clocks for it.
>
> And in my proposal, I suggested that clocks without drivers are
> good candidates to list in the domain, with the caveat that the be
> called out (documented) as being device clocks that are missing a
> driver, so when a driver shows up they can be moved accordingly, and in
> a way that actually describes the hardware.

What happens if someone disables the driver using the CONFIG subsystem?

What happens if this is a device that someone has set to 'status =
"disabled";' in the device tree?

Even if the device is disabled in one of those two ways, we still need
the clocks to be turned on. ...so if we turn on/off the VIO domain we
need to turn on the EDP clock even if there's no EDP in the current
board / config. We might turn on/off VIO for one of the other devices
in the VIO domain for one of the other devices in VIO that we are
using.

-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/