Re: [PATCH] ACPI / ARM64: Get configuration base address of ECAM via ACPI MCFG table

[Dennis Chen]

On Fri, Aug 28, 2015 at 03:39:43PM +0100, Lorenzo Pieralisi wrote:
> Hi Dennis,
> 
> You should CC linux-pci@xxxxxxxxxxxxxxx and the PCI subsystem
> maintainer next time.
>
>

Good reminder! Thanks, mate ;-)
 
> On Fri, Aug 28, 2015 at 01:49:23PM +0100, Dennis Chen wrote:
> > This patch will fall back to ACPI MCFG table if _CBA method fails
> > to get the configuration base address of ECAM. Firmware on ARM
> > platform uses MCFG table instead of _CBA method. This is needed
> > to scan the PCIe root complex for ARM SoC.
> 
> Code to enumerate PCI with ACPI on ARM64 is under review:
> 
> https://lkml.org/lkml/2015/6/8/443
>

Oops,seems I am late, just go through the code to scan the root:
https://lkml.org/lkml/2015/5/26/215
a little bit complicated, to be honest. Maybe I can have some input then.
 
> Having said that, I do not think this patch will be needed,
> you can't add code in the kernel because it may be needed in
> the future, I do not see how it can be possibly useful at present
> on ARM64 unless you pulled some patch dependencies; if that's the
> case you should have listed them.
> 
> This patch can't be review standalone since it has no use in
> the current kernel (at least for ARM64, it should be tested
> on x86 though).

I do have a patch set to enumerate all the downstream devices of
the PCIe root bridge. With this patch, I can focus on the enabling/fixing
of the drivers of those devices. As you can imagine, the patch have some 
redundant codes with PCI/ACPI codes now under x86 directory. It's reasonable 
to move those arch-agnostic codes to a common place. I am OK to keep
them pending as private as a test code base for me  

As for this patch, it's used to get the ecam address from MCFG instead of
_CBA which x86 is using, see acpi_pci_root_get_mcfg_addr() code.
So, it's for ARM64 and can be tested with uefi definitely. I'm missing some 
context here?


> Thanks,
> Lorenzo
> 
> > Signed-off-by: Dennis Chen <dennis.chen@xxxxxxx>
> > ---
> >  drivers/pci/pci-acpi.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 97 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index 314a625..211b9d9 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -27,18 +27,110 @@ const u8 pci_acpi_dsm_uuid[] = {
> >  	0x91, 0x17, 0xea, 0x4d, 0x19, 0xc3, 0x43, 0x4d
> >  };
> >  
> > +static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg)
> > +{
> > +	if (mcfg->header.revision != 1) {
> > +		pr_err("invalid header revision:%d in ACPI MCFG table\n",
> > +			mcfg->header.revision);
> > +		return -EINVAL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static phys_addr_t __init acpi_get_mcfg_cba(u16 segment, u8 bus)
> > +{
> > +	struct acpi_table_header *table = NULL;
> > +	acpi_size tbl_size;
> > +	struct acpi_table_mcfg *mcfg = NULL;
> > +	struct acpi_mcfg_allocation *cfg_table, *cfg;
> > +	acpi_status status;
> > +	phys_addr_t cba = 0;
> > +	unsigned long i;
> > +	int entries;
> > +
> > +	if (acpi_disabled)
> > +		return 0;
> > +
> > +	status = acpi_get_table_with_size(ACPI_SIG_MCFG, 0, &table, &tbl_size);
> > +	if (ACPI_FAILURE(status)) {
> > +		const char *msg = acpi_format_exception(status);
> > +
> > +		pr_err("Failed to get MCFG table, %s\n", msg);
> > +		return 0;
> > +	}
> > +
> > +	if (table)
> > +		mcfg = (struct acpi_table_mcfg *)table;
> > +
> > +	entries = 0;
> > +	i = table->length - sizeof(struct acpi_table_mcfg);
> > +	while (i >= sizeof(struct acpi_mcfg_allocation)) {
> > +		entries++;
> > +		i -= sizeof(struct acpi_mcfg_allocation);
> > +	}
> > +	if (entries == 0) {
> > +		pr_err("ACPI MCFG table has no entries\n");
> > +		goto out;
> > +	}
> > +
> > +	cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1];
> > +	for (i = 0; i < entries; i++) {
> > +		cfg = &cfg_table[i];
> > +		if (acpi_mcfg_check_entry(mcfg))
> > +			goto out;
> > +
> > +		if (cfg->pci_segment == segment &&
> > +			cfg->start_bus_number <= bus &&
> > +			bus <= cfg->end_bus_number) {
> > +			cba = (phys_addr_t)cfg->address;
> > +			goto out;
> > +		}
> > +	}
> > +out:
> > +	/*
> > +	 * acpi_get_table_with_size() creates MCFG table mapping that
> > +	 * should be released after parsing and before resuming boot
> > +	 */
> > +	early_acpi_os_unmap_memory(table, tbl_size);
> > +	return cba;
> > +}
> > +
> >  phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
> >  {
> >  	acpi_status status = AE_NOT_EXIST;
> > -	unsigned long long mcfg_addr;
> > +	unsigned long long mcfg_addr, mcfg_seg, mcfg_bus;
> > +	u16 seg;
> > +	u8 bus;
> > +
> > +	if (!handle)
> > +		return 0;
> >  
> > -	if (handle)
> > -		status = acpi_evaluate_integer(handle, METHOD_NAME__CBA,
> > +	status = acpi_evaluate_integer(handle, METHOD_NAME__CBA,
> >  					       NULL, &mcfg_addr);
> > +	if (ACPI_SUCCESS(status))
> > +		return (phys_addr_t)mcfg_addr;
> > +
> > +	pr_info("ACPI: Falling back to acpi mcfg table\n");
> > +
> > +	/*
> > +	 * Fall back to MCFG table if _CBA failed:
> > +	 * get the mcfg_addr via ACPI MCFG table. PCI Firmware v3.2 spec: 4.1.2
> > +	 */
> > +	status = acpi_evaluate_integer(handle, METHOD_NAME__SEG,
> > +						NULL, &mcfg_seg);
> >  	if (ACPI_FAILURE(status))
> > -		return 0;
> > +		mcfg_seg = 0;
> > +
> > +	status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
> > +						NULL, &mcfg_bus);
> > +	if (ACPI_FAILURE(status))
> > +		mcfg_bus = 0;
> > +
> > +	seg = mcfg_seg & 0xFFFF;
> > +	bus = mcfg_bus & 0xFF;
> >  
> > -	return (phys_addr_t)mcfg_addr;
> > +	return acpi_get_mcfg_cba(seg, bus);
> >  }
> >  
> >  static acpi_status decode_type0_hpx_record(union acpi_object *record,
> > -- 
> > 1.9.1
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> > 
> 

Regards,
Dennis

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/