Re: [PATCH] cpufreq: imx: use the managed interfaces for resources allocation

[Lucas Stach]

Am Dienstag, den 01.09.2015, 01:05 +0800 schrieb Bai Ping:
> Replace the clk_get() and regulator_get() with the managed interfaces
> then the error path can be simplified.
> 
> Signed-off-by: Bai Ping <b51503@xxxxxxxxxxxxx>

NACK.
Please go back in the git history of this file and look at the commits.
Those clocks and regulators are explicitly _not_ using the managed
functions, as this would lead to resource leaks.

Regards,
Lucas
> ---
>  drivers/cpufreq/imx6q-cpufreq.c | 52 +++++++++++------------------------------
>  1 file changed, 13 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index 380a90d..1439f93 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -174,25 +174,25 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  		return -ENOENT;
>  	}
>  
> -	arm_clk = clk_get(cpu_dev, "arm");
> -	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
> -	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
> -	step_clk = clk_get(cpu_dev, "step");
> -	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
> +	arm_clk = devm_clk_get(cpu_dev, "arm");
> +	pll1_sys_clk = devm_clk_get(cpu_dev, "pll1_sys");
> +	pll1_sw_clk = devm_clk_get(cpu_dev, "pll1_sw");
> +	step_clk = devm_clk_get(cpu_dev, "step");
> +	pll2_pfd2_396m_clk = devm_clk_get(cpu_dev, "pll2_pfd2_396m");
>  	if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
>  	    IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
>  		dev_err(cpu_dev, "failed to get clocks\n");
>  		ret = -ENOENT;
> -		goto put_clk;
> +		goto put_node;
>  	}
>  
> -	arm_reg = regulator_get(cpu_dev, "arm");
> -	pu_reg = regulator_get_optional(cpu_dev, "pu");
> -	soc_reg = regulator_get(cpu_dev, "soc");
> +	arm_reg = devm_regulator_get(cpu_dev, "arm");
> +	pu_reg = devm_regulator_get_optional(cpu_dev, "pu");
> +	soc_reg = devm_regulator_get(cpu_dev, "soc");
>  	if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) {
>  		dev_err(cpu_dev, "failed to get regulators\n");
>  		ret = -ENOENT;
> -		goto put_reg;
> +		goto put_node;
>  	}
>  
>  	/*
> @@ -205,7 +205,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  		ret = of_init_opp_table(cpu_dev);
>  		if (ret < 0) {
>  			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
> -			goto put_reg;
> +			goto put_node;
>  		}
>  
>  		/* Because we have added the OPPs here, we must free them */
> @@ -222,7 +222,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
>  	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
>  	if (ret) {
>  		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
> -		goto put_reg;
> +		goto out_free_opp;
>  	}
>  
>  	/* Make imx6_soc_volt array's size same as arm opp number */
> @@ -313,24 +313,7 @@ free_freq_table:
>  out_free_opp:
>  	if (free_opp)
>  		of_free_opp_table(cpu_dev);
> -put_reg:
> -	if (!IS_ERR(arm_reg))
> -		regulator_put(arm_reg);
> -	if (!IS_ERR(pu_reg))
> -		regulator_put(pu_reg);
> -	if (!IS_ERR(soc_reg))
> -		regulator_put(soc_reg);
> -put_clk:
> -	if (!IS_ERR(arm_clk))
> -		clk_put(arm_clk);
> -	if (!IS_ERR(pll1_sys_clk))
> -		clk_put(pll1_sys_clk);
> -	if (!IS_ERR(pll1_sw_clk))
> -		clk_put(pll1_sw_clk);
> -	if (!IS_ERR(step_clk))
> -		clk_put(step_clk);
> -	if (!IS_ERR(pll2_pfd2_396m_clk))
> -		clk_put(pll2_pfd2_396m_clk);
> +put_node:
>  	of_node_put(np);
>  	return ret;
>  }
> @@ -341,15 +324,6 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
>  	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
>  	if (free_opp)
>  		of_free_opp_table(cpu_dev);
> -	regulator_put(arm_reg);
> -	if (!IS_ERR(pu_reg))
> -		regulator_put(pu_reg);
> -	regulator_put(soc_reg);
> -	clk_put(arm_clk);
> -	clk_put(pll1_sys_clk);
> -	clk_put(pll1_sw_clk);
> -	clk_put(step_clk);
> -	clk_put(pll2_pfd2_396m_clk);
>  
>  	return 0;
>  }

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/