Re: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
From: Roger Quadros
Date: Wed Sep 30 2015 - 03:39:59 EST
Brian/David,
On 18/09/15 17:53, Roger Quadros wrote:
> Hi,
>
> We do a couple of things in this series which result in
> cleaner device tree implementation, faster perfomance and
> multi-platform support. As an added bonus we get new GPI/Interrupt pins
> for use in the system.
>
> - Establish a custom interface between NAND and GPMC driver. This is
> needed because all of the NAND registers sit in the GPMC register space.
> Some bits like NAND IRQ are even shared with GPMC.
>
> - Remove NAND IRQ handling from omap-gpmc driver, share the GPMC IRQ
> with the omap2-nand driver and handle NAND IRQ events in the NAND driver.
> This causes performance increase when using prefetch-irq mode.
> 30% increase in read, 17% increase in write in prefetch-irq mode.
>
> - Clean up device tree support so that omap-gpmc IP and the omap2 NAND
> driver can be used on non-OMAP platforms. e.g. Keystone.
>
> - Implement GPIOCHIP + IRQCHIP for the GPMC WAITPINS. SoCs can contain
> 2 to 4 of these and most of them would be unused otherwise. It also
> allows a cleaner implementation of NAND Ready pin status for the NAND driver.
>
> - Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
>
> This series is available at
> git@xxxxxxxxxx:rogerq/linux.git
> in branch
> for-v4.4/gpmc-v3
Could you please ack the patches affecting the omap2 nand driver?
These would be patches 4, 6, 9, 10, 11, 12, 18. Thanks.
cheers,
-roger
>
> Changelog:
> v3:
> -Fixed and tested NAND using legacy boot on omap3-beagle.
> -Support rising and falling edge interrupts on WAITpins.
> -Update DT node of all gpmc users.
>
> Roger Quadros (27):
> ARM: OMAP2+: gpmc: Add platform data
> ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
> memory: omap-gpmc: Introduce GPMC to NAND interface
> mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
> memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
> mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
> check
> memory: omap-gpmc: Remove NAND IRQ code
> memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface
> mtd: nand: omap2: manage NAND interrupts
> mtd: nand: omap: Copy platform data parameters to omap_nand_info data
> mtd: nand: omap: Clean up device tree support
> mtd: nand: omap: Update DT binding documentation
> memory: omap-gpmc: Prevent mapping into 1st 16MB
> memory: omap-gpmc: Move device tree binding to correct location
> memory: omap-gpmc: Support general purpose input for WAITPINs
> memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
> memory: omap-gpmc: Add irqchip support to the gpiochip
> mtd: nand: omap2: Implement NAND ready using gpiolib
> memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
> gpmc_regs
> ARM: dts: dra7: Fix NAND device nodes.
> ARM: dts: dra7x-evm: Provide NAND ready pin
> ARM: dts: am437x: Fix NAND device nodes
> ARM: dts: am437x-gp-evm: Provide NAND ready pin
> ARM: dts: am335x: Fix NAND device nodes
> ARM: dts: am335x: Provide NAND ready pin
> ARM: dts: dm816x: Fix gpmc and NAND node
> ARM: dts: omap3: Fix gpmc and NAND nodes
>
> Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 -----
> .../bindings/memory-controllers/omap-gpmc.txt | 130 +++++
> .../devicetree/bindings/mtd/gpmc-nand.txt | 16 +-
> arch/arm/boot/dts/am335x-chilisom.dtsi | 7 +-
> arch/arm/boot/dts/am335x-evm.dts | 7 +-
> arch/arm/boot/dts/am335x-igep0033.dtsi | 7 +-
> arch/arm/boot/dts/am33xx.dtsi | 4 +
> arch/arm/boot/dts/am4372.dtsi | 4 +
> arch/arm/boot/dts/am437x-gp-evm.dts | 8 +-
> arch/arm/boot/dts/am43x-epos-evm.dts | 8 +-
> arch/arm/boot/dts/dm8168-evm.dts | 7 +-
> arch/arm/boot/dts/dm816x.dtsi | 4 +
> arch/arm/boot/dts/dra7-evm.dts | 6 +-
> arch/arm/boot/dts/dra7.dtsi | 4 +
> arch/arm/boot/dts/dra72-evm.dts | 6 +-
> arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 7 +-
> arch/arm/boot/dts/omap3-beagle.dts | 2 +
> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 5 +-
> arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 3 +
> arch/arm/boot/dts/omap3-evm-37xx.dts | 7 +-
> arch/arm/boot/dts/omap3-gta04.dtsi | 3 +
> arch/arm/boot/dts/omap3-igep.dtsi | 5 +-
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +-
> arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-ldp.dts | 9 +-
> arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 5 +-
> arch/arm/boot/dts/omap3-pandora-common.dtsi | 3 +
> arch/arm/boot/dts/omap3-tao3530.dtsi | 5 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +
> arch/arm/boot/dts/omap3430-sdp.dts | 5 +-
> arch/arm/mach-omap2/gpmc-nand.c | 11 +-
> drivers/memory/omap-gpmc.c | 640 ++++++++++++---------
> drivers/mtd/nand/omap2.c | 261 ++++++---
> include/linux/omap-gpmc.h | 183 ++----
> include/linux/platform_data/gpmc-omap.h | 167 ++++++
> include/linux/platform_data/mtd-nand-omap2.h | 12 +-
> 36 files changed, 1045 insertions(+), 648 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> create mode 100644 include/linux/platform_data/gpmc-omap.h
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/