[PATCH] net: phy: dp83848: Add TI DP83848 Ethernet PHY

From: Andrew F. Davis
Date: Tue Oct 20 2015 - 17:29:19 EST


Add support for the TI DP83848 Ethernet PHY device.

The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant
single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting
the MII and RMII interfaces.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
drivers/net/phy/Kconfig | 5 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83848.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 drivers/net/phy/dp83848.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index c5ad98a..12fa29a 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -122,6 +122,11 @@ config MICREL_PHY
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.

+config DP83848_PHY
+ tristate "Driver for Texas Instruments DP83848 PHY"
+ ---help---
+ Supports the DP83848 PHY.
+
config DP83867_PHY
tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 87f079c..b748224 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
+obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
new file mode 100644
index 0000000..5ce9bef
--- /dev/null
+++ b/drivers/net/phy/dp83848.c
@@ -0,0 +1,99 @@
+/*
+ * Driver for the Texas Instruments DP83848 PHY
+ *
+ * Copyright (C) 2015 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DP83848_PHY_ID 0x20005c90
+
+/* Registers */
+#define DP83848_MICR 0x11
+#define DP83848_MISR 0x12
+
+/* MICR Register Fields */
+#define DP83848_MICR_INT_OE BIT(0) /* Interrupt Output Enable */
+#define DP83848_MICR_INTEN BIT(1) /* Interrupt Enable */
+
+/* MISR Register Fields */
+#define DP83848_MISR_RHF_INT_EN BIT(0) /* Receive Error Counter */
+#define DP83848_MISR_FHF_INT_EN BIT(1) /* False Carrier Counter */
+#define DP83848_MISR_ANC_INT_EN BIT(2) /* Auto-negotiation complete */
+#define DP83848_MISR_DUP_INT_EN BIT(3) /* Duplex Status */
+#define DP83848_MISR_SPD_INT_EN BIT(4) /* Speed status */
+#define DP83848_MISR_LINK_INT_EN BIT(5) /* Link status */
+#define DP83848_MISR_ED_INT_EN BIT(6) /* Energy detect */
+#define DP83848_MISR_LQM_INT_EN BIT(7) /* Link Quality Monitor */
+
+static int dp83848_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, DP83848_MISR);
+
+ return err < 0 ? err : 0;
+}
+
+static int dp83848_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = phy_write(phydev, DP83848_MICR,
+ DP83848_MICR_INT_OE |
+ DP83848_MICR_INTEN);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, DP83848_MISR,
+ DP83848_MISR_ANC_INT_EN |
+ DP83848_MISR_DUP_INT_EN |
+ DP83848_MISR_SPD_INT_EN |
+ DP83848_MISR_LINK_INT_EN);
+ }
+
+ return phy_write(phydev, DP83848_MICR, 0x0);
+}
+
+static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
+ { DP83848_PHY_ID, 0xfffffff0 },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
+
+static struct phy_driver dp83848_driver[] = {
+ {
+ .phy_id = DP83848_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83848",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+
+ .soft_reset = genphy_soft_reset,
+ .config_init = genphy_config_init,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+
+ /* IRQ related */
+ .ack_interrupt = dp83848_ack_interrupt,
+ .config_intr = dp83848_config_intr,
+
+ .driver = { .owner = THIS_MODULE, },
+ },
+};
+module_phy_driver(dp83848_driver);
+
+MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
+MODULE_AUTHOR("Andrew F. Davis <afd@xxxxxx");
+MODULE_LICENSE("GPL");
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/