Re: [PATCH] net: phy: dp83848: Add TI DP83848 Ethernet PHY

[Florian Fainelli]

On 20/10/15 14:28, Andrew F. Davis wrote:
> Add support for the TI DP83848 Ethernet PHY device.
> 
> The DP83848 is a highly reliable, feature rich, IEEE 802.3 compliant
> single port 10/100 Mb/s Ethernet Physical Layer Transceiver supporting
> the MII and RMII interfaces.
> 
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

Just one comment below:

[snip]

> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index 87f079c..b748224 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
>  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
>  obj-$(CONFIG_NATIONAL_PHY)	+= national.o
>  obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
> +obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
>  obj-$(CONFIG_DP83867_PHY)	+= dp83867.o

This is a pretty small PHY driver, would it make sense to look into
consolidating these into e.g: dp838xx.c for instance? dp83640 is big
enough to be its own driver it seems.
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/