[PATCH] comedi: ii_pci20kc: Fix coding style - use BIT macro
From: Ranjith
Date: Mon Nov 09 2015 - 11:22:25 EST
BIT macro is used for defining BIT location instead of
shifting operator - coding style issue
Signed-off-by: Ranjith <ranjithece24@xxxxxxxxx>
---
drivers/staging/comedi/drivers/ii_pci20kc.c | 70 +++++++++++++--------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 14ef1f6..6665d02 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -37,37 +37,37 @@
#define II20K_SIZE 0x400
#define II20K_MOD_OFFSET 0x100
#define II20K_ID_REG 0x00
-#define II20K_ID_MOD1_EMPTY (1 << 7)
-#define II20K_ID_MOD2_EMPTY (1 << 6)
-#define II20K_ID_MOD3_EMPTY (1 << 5)
+#define II20K_ID_MOD1_EMPTY BIT(7)
+#define II20K_ID_MOD2_EMPTY BIT(6)
+#define II20K_ID_MOD3_EMPTY BIT(5)
#define II20K_ID_MASK 0x1f
#define II20K_ID_PCI20001C_1A 0x1b /* no on-board DIO */
#define II20K_ID_PCI20001C_2A 0x1d /* on-board DIO */
#define II20K_MOD_STATUS_REG 0x40
-#define II20K_MOD_STATUS_IRQ_MOD1 (1 << 7)
-#define II20K_MOD_STATUS_IRQ_MOD2 (1 << 6)
-#define II20K_MOD_STATUS_IRQ_MOD3 (1 << 5)
+#define II20K_MOD_STATUS_IRQ_MOD1 BIT(7)
+#define II20K_MOD_STATUS_IRQ_MOD2 BIT(6)
+#define II20K_MOD_STATUS_IRQ_MOD3 BIT(5)
#define II20K_DIO0_REG 0x80
#define II20K_DIO1_REG 0x81
#define II20K_DIR_ENA_REG 0x82
-#define II20K_DIR_DIO3_OUT (1 << 7)
-#define II20K_DIR_DIO2_OUT (1 << 6)
-#define II20K_BUF_DISAB_DIO3 (1 << 5)
-#define II20K_BUF_DISAB_DIO2 (1 << 4)
-#define II20K_DIR_DIO1_OUT (1 << 3)
-#define II20K_DIR_DIO0_OUT (1 << 2)
-#define II20K_BUF_DISAB_DIO1 (1 << 1)
-#define II20K_BUF_DISAB_DIO0 (1 << 0)
+#define II20K_DIR_DIO3_OUT BIT(7)
+#define II20K_DIR_DIO2_OUT BIT(6)
+#define II20K_BUF_DISAB_DIO3 BIT(5)
+#define II20K_BUF_DISAB_DIO2 BIT(4)
+#define II20K_DIR_DIO1_OUT BIT(3)
+#define II20K_DIR_DIO0_OUT BIT(2)
+#define II20K_BUF_DISAB_DIO1 BIT(1)
+#define II20K_BUF_DISAB_DIO0 BIT(0)
#define II20K_CTRL01_REG 0x83
-#define II20K_CTRL01_SET (1 << 7)
-#define II20K_CTRL01_DIO0_IN (1 << 4)
-#define II20K_CTRL01_DIO1_IN (1 << 1)
+#define II20K_CTRL01_SET BIT(7)
+#define II20K_CTRL01_DIO0_IN BIT(4)
+#define II20K_CTRL01_DIO1_IN BIT(1)
#define II20K_DIO2_REG 0xc0
#define II20K_DIO3_REG 0xc1
#define II20K_CTRL23_REG 0xc3
-#define II20K_CTRL23_SET (1 << 7)
-#define II20K_CTRL23_DIO2_IN (1 << 4)
-#define II20K_CTRL23_DIO3_IN (1 << 1)
+#define II20K_CTRL23_SET BIT(7)
+#define II20K_CTRL23_DIO2_IN BIT(4)
+#define II20K_CTRL23_DIO3_IN BIT(1)
#define II20K_ID_PCI20006M_1 0xe2 /* 1 AO channels */
#define II20K_ID_PCI20006M_2 0xe3 /* 2 AO channels */
@@ -78,27 +78,27 @@
#define II20K_ID_PCI20341M_1 0x77 /* 4 AI channels */
#define II20K_AI_STATUS_CMD_REG 0x01
-#define II20K_AI_STATUS_CMD_BUSY (1 << 7)
-#define II20K_AI_STATUS_CMD_HW_ENA (1 << 1)
-#define II20K_AI_STATUS_CMD_EXT_START (1 << 0)
+#define II20K_AI_STATUS_CMD_BUSY BIT(7)
+#define II20K_AI_STATUS_CMD_HW_ENA BIT(1)
+#define II20K_AI_STATUS_CMD_EXT_START BIT(0)
#define II20K_AI_LSB_REG 0x02
#define II20K_AI_MSB_REG 0x03
#define II20K_AI_PACER_RESET_REG 0x04
#define II20K_AI_16BIT_DATA_REG 0x06
#define II20K_AI_CONF_REG 0x10
-#define II20K_AI_CONF_ENA (1 << 2)
+#define II20K_AI_CONF_ENA BIT(2)
#define II20K_AI_OPT_REG 0x11
-#define II20K_AI_OPT_TRIG_ENA (1 << 5)
-#define II20K_AI_OPT_TRIG_INV (1 << 4)
+#define II20K_AI_OPT_TRIG_ENA BIT(5)
+#define II20K_AI_OPT_TRIG_INV BIT(4)
#define II20K_AI_OPT_TIMEBASE(x) (((x) & 0x3) << 1)
-#define II20K_AI_OPT_BURST_MODE (1 << 0)
+#define II20K_AI_OPT_BURST_MODE BIT(0)
#define II20K_AI_STATUS_REG 0x12
-#define II20K_AI_STATUS_INT (1 << 7)
-#define II20K_AI_STATUS_TRIG (1 << 6)
-#define II20K_AI_STATUS_TRIG_ENA (1 << 5)
-#define II20K_AI_STATUS_PACER_ERR (1 << 2)
-#define II20K_AI_STATUS_DATA_ERR (1 << 1)
-#define II20K_AI_STATUS_SET_TIME_ERR (1 << 0)
+#define II20K_AI_STATUS_INT BIT(7)
+#define II20K_AI_STATUS_TRIG BIT(6)
+#define II20K_AI_STATUS_TRIG_ENA BIT(5)
+#define II20K_AI_STATUS_PACER_ERR BIT(2)
+#define II20K_AI_STATUS_DATA_ERR BIT(1)
+#define II20K_AI_STATUS_SET_TIME_ERR BIT(0)
#define II20K_AI_LAST_CHAN_ADDR_REG 0x13
#define II20K_AI_CUR_ADDR_REG 0x14
#define II20K_AI_SET_TIME_REG 0x15
@@ -109,9 +109,9 @@
#define II20K_AI_START_TRIG_REG 0x1a
#define II20K_AI_COUNT_RESET_REG 0x1b
#define II20K_AI_CHANLIST_REG 0x80
-#define II20K_AI_CHANLIST_ONBOARD_ONLY (1 << 5)
+#define II20K_AI_CHANLIST_ONBOARD_ONLY BIT(5)
#define II20K_AI_CHANLIST_GAIN(x) (((x) & 0x3) << 3)
-#define II20K_AI_CHANLIST_MUX_ENA (1 << 2)
+#define II20K_AI_CHANLIST_MUX_ENA BIT(2)
#define II20K_AI_CHANLIST_CHAN(x) (((x) & 0x3) << 0)
#define II20K_AI_CHANLIST_LEN 0x80
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/