Re: [PATCH v2 1/3] dma: Add Freescale qDMA engine driver support
From: Vinod Koul
Date: Wed Nov 11 2015 - 03:10:37 EST
On Fri, Oct 23, 2015 at 09:59:11AM +0800, Yuan Yao wrote:
> +config FSL_QDMA
> + tristate "Freescale qDMA engine support"
> + depends on SOC_LS1021A || ARCH_LAYERSCAPE
Where is this ARCH defined, quick grep revealed none
> +static void fsl_qdma_set_tcd_params(struct fsl_qdma_chan *fsl_chan,
> + u64 src, u64 dst, u32 nbytes)
> +{
> + void __iomem *addr = fsl_chan->qdma->membase;
> + u32 reg;
> +
> + /*
> + * Source address.
> + * Represents address bits 31-0 of a 49-bit source address.
> + */
> + qdma_writel(fsl_chan->qdma, (u32)src, addr + FSL_QDMA_DLSAR);
> + /*
> + * Source address.
> + * Represents address bits 47-32 of a 49-bit source address.
> + */
> + reg = qdma_readl(fsl_chan->qdma, addr + FSL_QDMA_DLSATR);
> + reg |= (u16)(src >> 32) & 0xffff;
> + reg |= FSL_QDMA_SRTTYPE_R_N;
> + qdma_writel(fsl_chan->qdma, reg, addr + FSL_QDMA_DLSATR);
How does this work on systems with enither endieness ?
Also why not use readq/writeq helpers, registers seem to be contagious
> +static enum dma_status fsl_qdma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie, struct dma_tx_state *txstate)
> +{
> + return dma_cookie_status(chan, cookie, txstate);
No residue ?
> +static irqreturn_t fsl_qdma_controller_handler_err(int irq, void *dev_id)
> +{
> + struct fsl_qdma_engine *fsl_qdma = dev_id;
> + u32 reg;
> +
> + reg = qdma_readl(fsl_qdma, fsl_qdma->membase + FSL_QDMA_DLSR);
> +
> + if (reg & FSL_QDMA_DLSR_TE) {
> + dev_err(fsl_qdma->dma_dev.dev,
> + "Transfer error. Check your address please!\n");
It would help to print the addresses...
> + ret = devm_request_irq(&pdev->dev, fsl_qdma->controller_irq,
> + fsl_qdma_controller_handler, 0,
> + "qDMA controller", fsl_qdma);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Can't register qDMA controller IRQ.\n");
> + return ret;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, fsl_qdma->err_irq,
> + fsl_qdma_controller_handler_err, 0,
> + "qDMA err", fsl_qdma);
> + if (ret) {
> + dev_err(&pdev->dev, "Can't register qDMA err IRQ.\n");
> + return ret;
> + }
why do you want devm variant here..?
> + dma_cap_set(DMA_PRIVATE, fsl_qdma->dma_dev.cap_mask);
> + dma_cap_set(DMA_MEMCPY, fsl_qdma->dma_dev.cap_mask);
> +
> + fsl_qdma->dma_dev.dev = &pdev->dev;
> + fsl_qdma->dma_dev.device_free_chan_resources
> + = fsl_qdma_free_chan_resources;
> + fsl_qdma->dma_dev.device_tx_status = fsl_qdma_tx_status;
> + fsl_qdma->dma_dev.device_prep_dma_memcpy = fsl_qdma_prep_memcpy;
> + fsl_qdma->dma_dev.device_issue_pending = fsl_qdma_issue_pending;
No terminate_all callback?
> +static int fsl_qdma_remove(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct fsl_qdma_engine *fsl_qdma = platform_get_drvdata(pdev);
> +
> + of_dma_controller_free(np);
> + dma_async_device_unregister(&fsl_qdma->dma_dev);
And as i said above, the irq is left enabled, pls free that up
> +static int __init fsl_qdma_init(void)
> +{
> + return platform_driver_register(&fsl_qdma_driver);
> +}
> +subsys_initcall(fsl_qdma_init);
> +
> +static void __exit fsl_qdma_exit(void)
> +{
> + platform_driver_unregister(&fsl_qdma_driver);
> +}
> +module_exit(fsl_qdma_exit);
module_platform_driver please
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/