Re: [PATCH] sound: depend on ZONE_DMA
From: Boaz Harrosh
Date: Sun Nov 15 2015 - 05:17:26 EST
On 11/12/2015 10:13 PM, Dan Williams wrote:
> There are several sound drivers that 'select ZONE_DMA'. This is
> backwards as ZONE_DMA is an architecture capability exported to drivers.
> Switch the polarity of the dependency to disable these drivers when the
> architecture does not support ZONE_DMA. This was discovered in the
> context of testing/enabling devm_memremap_pages() which depends on
> ZONE_DEVICE. ZONE_DEVICE in turn depends on !ZONE_DMA.
>
> Cc: Jaroslav Kysela <perex@xxxxxxxx>
> Cc: Takashi Iwai <tiwai@xxxxxxxx>
> Cc: <alsa-devel@xxxxxxxxxxxxxxxx>
> Reported-by: Jeff Moyer <jmoyer@xxxxxxxxxx>
> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Yes sorry about that. I had the exact patch in my original 4.3-rc1
tree but forgot to send it.
Reviewed-by: Boaz Harrosh <boaz@xxxxxxxxxxxxx>
You will need stabe@ for 4.3 as well.
Thanks
Boaz
> ---
> sound/pci/Kconfig | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
> index edfc1b8d553e..656ce39bddbc 100644
> --- a/sound/pci/Kconfig
> +++ b/sound/pci/Kconfig
> @@ -25,7 +25,7 @@ config SND_ALS300
> select SND_PCM
> select SND_AC97_CODEC
> select SND_OPL3_LIB
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
>
> @@ -50,7 +50,7 @@ config SND_ALI5451
> tristate "ALi M5451 PCI Audio Controller"
> select SND_MPU401_UART
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for the integrated AC97 sound
> device on motherboards using the ALi M5451 Audio Controller
> @@ -155,7 +155,7 @@ config SND_AZT3328
> select SND_PCM
> select SND_RAWMIDI
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for Aztech AZF3328 (PCI168)
> soundcards.
> @@ -463,7 +463,7 @@ config SND_EMU10K1
> select SND_HWDEP
> select SND_RAWMIDI
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y to include support for Sound Blaster PCI 512, Live!,
> Audigy and E-mu APS (partially supported) soundcards.
> @@ -479,7 +479,7 @@ config SND_EMU10K1X
> tristate "Emu10k1X (Dell OEM Version)"
> select SND_AC97_CODEC
> select SND_RAWMIDI
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for the Dell OEM version of the
> Sound Blaster Live!.
> @@ -513,7 +513,7 @@ config SND_ES1938
> select SND_OPL3_LIB
> select SND_MPU401_UART
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on ESS Solo-1
> (ES1938, ES1946, ES1969) chips.
> @@ -525,7 +525,7 @@ config SND_ES1968
> tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
> select SND_MPU401_UART
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on ESS Maestro
> 1/2/2E chips.
> @@ -612,7 +612,7 @@ config SND_ICE1712
> select SND_MPU401_UART
> select SND_AC97_CODEC
> select BITREVERSE
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on the
> ICE1712 (Envy24) chip.
> @@ -700,7 +700,7 @@ config SND_LX6464ES
> config SND_MAESTRO3
> tristate "ESS Allegro/Maestro3"
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on ESS Maestro 3
> (Allegro) chips.
> @@ -806,7 +806,7 @@ config SND_SIS7019
> tristate "SiS 7019 Audio Accelerator"
> depends on X86_32
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for the SiS 7019 Audio Accelerator.
>
> @@ -818,7 +818,7 @@ config SND_SONICVIBES
> select SND_OPL3_LIB
> select SND_MPU401_UART
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on the S3
> SonicVibes chip.
> @@ -830,7 +830,7 @@ config SND_TRIDENT
> tristate "Trident 4D-Wave DX/NX; SiS 7018"
> select SND_MPU401_UART
> select SND_AC97_CODEC
> - select ZONE_DMA
> + depends on ZONE_DMA
> help
> Say Y here to include support for soundcards based on Trident
> 4D-Wave DX/NX or SiS 7018 chips.
>
> _______________________________________________
> Linux-nvdimm mailing list
> Linux-nvdimm@xxxxxxxxxxxx
> https://lists.01.org/mailman/listinfo/linux-nvdimm
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/