[PATCH] brcmnand: Clear EXT_ADDR error registers in PIO mode

[Simon Arlott]

If an error occurs in flash above 4GB in PIO mode then the EXT_ADDR
registers will be set to the location of the error and never cleared.

Reset them to 0 before reading.

Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>
---
 drivers/mtd/nand/brcmnand/brcmnand.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index 12c6190..2c8f67f 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -1400,6 +1400,8 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Clear error addresses */
 	brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_ADDR, 0);
 	brcmnand_write_reg(ctrl, BRCMNAND_CORR_ADDR, 0);
+	brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_EXT_ADDR, 0);
+	brcmnand_write_reg(ctrl, BRCMNAND_CORR_EXT_ADDR, 0);
 
 	brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS,
 			(host->cs << 16) | ((addr >> 32) & 0xffff));
-- 
2.1.4

-- 
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/