Re: [PATCH] brcmnand: Clear EXT_ADDR error registers in PIO mode

[Brian Norris]

+ bcm-kernel-feedback-list

On Mon, Nov 16, 2015 at 10:05:39PM +0000, Simon Arlott wrote:
> If an error occurs in flash above 4GB in PIO mode then the EXT_ADDR
> registers will be set to the location of the error and never cleared.
> 
> Reset them to 0 before reading.
> 
> Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>

Patch looks OK. Did you see this problem in practice, or is this just
theoretical? I thought the documentation seemed to suggest these
registers were cleared together with their non-_EXT counterparts. But
implementation definitely trumps documentation for HW.

Brian

> ---
>  drivers/mtd/nand/brcmnand/brcmnand.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
> index 12c6190..2c8f67f 100644
> --- a/drivers/mtd/nand/brcmnand/brcmnand.c
> +++ b/drivers/mtd/nand/brcmnand/brcmnand.c
> @@ -1400,6 +1400,8 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
>  	/* Clear error addresses */
>  	brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_ADDR, 0);
>  	brcmnand_write_reg(ctrl, BRCMNAND_CORR_ADDR, 0);
> +	brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_EXT_ADDR, 0);
> +	brcmnand_write_reg(ctrl, BRCMNAND_CORR_EXT_ADDR, 0);
>  
>  	brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS,
>  			(host->cs << 16) | ((addr >> 32) & 0xffff));
> -- 
> 2.1.4
> 
> -- 
> Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/