Re: [PATCH v2 03/19] ARM: dts: Add DMC bus node for Exynos3250

[Chanwoo Choi]

On 2015ë 12ì 10ì 09:44, Krzysztof Kozlowski wrote:
> On 09.12.2015 13:07, Chanwoo Choi wrote:
>> This patch adds the DMC (Dynamic Memory Controller) bus node for Exynos3250 SoC.
>> The DMC is an AMBA AXI-compliant slave to interface external JEDEC standard
>> SDRAM devices. The bus includes the OPP tables and the source clock for DMC
>> block.
>>
>> Following list specifies the detailed relation between the clock and DMC block:
>> - The source clock of DMC block : div_dmc
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/exynos3250.dtsi | 34 ++++++++++++++++++++++++++++++++++
>>  1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>> index 2f30d632f1cc..7214c5e42150 100644
>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>> @@ -687,6 +687,40 @@
>>  			clock-names = "ppmu";
>>  			status = "disabled";
>>  		};
>> +
>> +		bus_dmc: bus_dmc {
>> +			compatible = "samsung,exynos-bus";
>> +			clocks = <&cmu_dmc CLK_DIV_DMC>;
>> +			clock-names = "bus";
>> +			operating-points-v2 = <&bus_dmc_opp_table>;
>> +			status = "disabled";
>> +		};
>> +
>> +		bus_dmc_opp_table: opp_table1 {
> 
> This is the firsy opp_table, right? So:
> s/opp_table1/opp_table0/

Right. It is first opp_table in exynos3250.dtsi.
But, I'm considering the OPP table of CPU freqeuncy as opp_table0.
So, I have the plan that support the operation-points-v2 for Exynos3250 CPU.

> 
>> +			compatible = "operating-points-v2";
>> +			opp-shared;
>> +
>> +			opp00 {
>> +				opp-hz = /bits/ 64 <50000000>;
>> +				opp-microvolt = <800000>;
>> +			};
>> +			opp01 {
>> +				opp-hz = /bits/ 64 <100000000>;
>> +				opp-microvolt = <800000>;
>> +			};
>> +			opp02 {
>> +				opp-hz = /bits/ 64 <134000000>;
>> +				opp-microvolt = <800000>;
> 
> Why 134, not 133 MHz?

When I used the 133000000, the source clock is changed to 100Mhz instead of 133MHz.
I add following test result on exynos3250-rinato board.

Case1.
When I use the 134 MHz, the source clock is changed to 133MHz
: exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (134000000) (real: 133333334)

Case2.
When I use the 133 MHz, the source clock is changed to 100MHz
: exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (133000000) (real: 100000000)

> 
>> +			};
>> +			opp03 {
>> +				opp-hz = /bits/ 64 <200000000>;
>> +				opp-microvolt = <800000>;
> 
> Shouldn't this be 825 mV, not 800? I think we used previously that value
> for our devices.

OK. I'll modify it.

Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/