[PATCH] Staging: comedi: fixed unwrapped commit description
From: Siddharth Ramesh
Date: Sat Dec 12 2015 - 03:51:47 EST
Fixed an unwrapped commit description.
Signed-off-by: Siddharth Ramesh <siddharth.ramesh93@xxxxxxxxx>
---
drivers/staging/comedi/comedi.h | 62 ++++++++++++++++++++++++++---------------
1 file changed, 40 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 66edda1..2c2984b 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -6,7 +6,8 @@
Copyright (C) 1998-2001 David A. Schleef <ds@xxxxxxxxxxx>
This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU Lesser General Public License as published by
+ it under the terms of the GNU Lesser General Public License as publishe
+ d by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
@@ -196,7 +197,7 @@
#define SDF_MODE3 0x0400 /* can do mode 3 */
#define SDF_MODE4 0x0800 /* can do mode 4 */
#define SDF_CMD 0x1000 /* can do commands (deprecated) */
-#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
+#define SDF_SOFT_CALIBRATED 0x2000
#define SDF_CMD_WRITE 0x4000 /* can do output commands */
#define SDF_CMD_READ 0x8000 /* can do input commands */
@@ -307,27 +308,36 @@ enum configuration_ids {
* data[4] = configuration parameter 2
* data[5] = configuration parameter 3
*
- * operation parameter 1 parameter 2 parameter 3
- * --------------------------------- ----------- ----------- -----------
+ * operation parameter 1 parameter 2 paramete
+ * r 3
+ * --------------------------------- ----------- ----------- --------
+ * ---
* COMEDI_DIGITAL_TRIG_DISABLE
- * COMEDI_DIGITAL_TRIG_ENABLE_EDGES left-shift rising-edges falling-edges
- * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS left-shift high-levels low-levels
+ * COMEDI_DIGITAL_TRIG_ENABLE_EDGES left-shift rising-edges falling-
+ * edges
+ * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS left-shift high-levels low-leve
+ * ls
*
- * COMEDI_DIGITAL_TRIG_DISABLE returns the trigger to its default, inactive,
+ * COMEDI_DIGITAL_TRIG_DISABLE returns the trigger to its default, inactive
+ * ,
* unconfigured state.
*
- * COMEDI_DIGITAL_TRIG_ENABLE_EDGES sets the rising and/or falling edge inputs
+ * COMEDI_DIGITAL_TRIG_ENABLE_EDGES sets the rising and/or falling edge inp
+ * uts
* that each can fire the trigger.
*
* COMEDI_DIGITAL_TRIG_ENABLE_LEVELS sets a combination of high and/or low
* level inputs that can fire the trigger.
*
- * "left-shift" is useful if the trigger has more than 32 inputs to specify the
+ * "left-shift" is useful if the trigger has more than 32 inputs to specify
+ * the
* first input for this configuration.
*
- * Some sequences of INSN_CONFIG_DIGITAL_TRIG instructions may have a (partly)
+ * Some sequences of INSN_CONFIG_DIGITAL_TRIG instructions may have a (part
+ * ly)
* accumulative effect, depending on the low-level driver. This is useful
- * when setting up a trigger that has more than 32 inputs or has a combination
+ * when setting up a trigger that has more than 32 inputs or has a combinat
+ * ion
* of edge and level triggered inputs.
*/
enum comedi_digital_trig_op {
@@ -717,7 +727,7 @@ enum ni_gpct_arm_source {
NI_GPCT_ARM_UNKNOWN = 0x1000,
};
-/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */
+/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER.*/
enum ni_gpct_filter_select {
NI_GPCT_FILTER_OFF = 0x0,
NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1,
@@ -750,8 +760,10 @@ enum ni_mio_clock_source {
#define NI_MIO_PLL_RTSI_CLOCK(x) (NI_MIO_PLL_RTSI0_CLOCK + (x))
-/* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING.
- The numbers assigned are not arbitrary, they correspond to the bits required
+/* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTI
+ * NG.
+ The numbers assigned are not arbitrary, they correspond to the bits requir
+ ed
to program the board. */
enum ni_rtsi_routing {
NI_RTSI_OUTPUT_ADR_START1 = 0,
@@ -771,8 +783,10 @@ enum ni_rtsi_routing {
/* Signals which can be routed to an NI PFI pin on an m-series board with
* INSN_CONFIG_SET_ROUTING. These numbers are also returned by
- * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing
- * cannot be changed. The numbers assigned are not arbitrary, they correspond
+ * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routin
+ * g
+ * cannot be changed. The numbers assigned are not arbitrary, they corresp
+ * ond
* to the bits required to program the board. */
enum ni_pfi_routing {
NI_PFI_OUTPUT_PFI_DEFAULT = 0,
@@ -814,7 +828,8 @@ enum ni_660x_pfi_routing {
NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */
};
-/* NI External Trigger lines. These values are not arbitrary, but are related
+/* NI External Trigger lines. These values are not arbitrary, but are rela
+ * ted
* to the bits required to program the board (offset by 1 for historical
* reasons). */
#define NI_EXT_PFI(x) (NI_USUAL_PFI_SELECT(x) - 1)
@@ -828,7 +843,8 @@ enum comedi_counter_status_flags {
};
/* Clock sources for CDIO subdevice on NI m-series boards. Used as the
- * scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd
+ * scan_begin_arg for a comedi_command. These sources may also be bitwise-o
+ * r'd
* with CR_INVERT to change polarity. */
enum ni_m_series_cdio_scan_begin_src {
NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0,
@@ -846,8 +862,10 @@ enum ni_m_series_cdio_scan_begin_src {
#define NI_CDIO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
#define NI_CDIO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
-/* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI
- * boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to
+/* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command o
+ * n NI
+ * boards. These scan begin sources can also be bitwise-or'd with CR_INVER
+ * T to
* change polarity. */
#define NI_AO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
#define NI_AO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
@@ -860,7 +878,7 @@ enum ni_freq_out_clock_source_bits {
};
/* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
- * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */
+ * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver).*/
enum amplc_dio_clock_source {
AMPLC_DIO_CLK_CLKN, /* per channel external clock
input/output pin (pin is only an
@@ -887,7 +905,7 @@ enum amplc_dio_clock_source {
};
/* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
- * timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver). */
+* timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver).*/
enum amplc_dio_ts_clock_src {
AMPLC_DIO_TS_CLK_1GHZ, /* 1 ns period with 20 ns granularity */
AMPLC_DIO_TS_CLK_1MHZ, /* 1 us period */
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/