RE: [PATCH 0/7][v4] Add OTG support for FSL socs

[Ramneek Mehresh]

> -----Original Message-----
> From: Jun Li [mailto:jun.li@xxxxxxx]
> Sent: Wednesday, December 23, 2015 10:36 AM
> To: Felipe Balbi <balbi@xxxxxx>; Mehresh Ramneek-B31383
> <ramneek.mehresh@xxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
> Cc: stern@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-
> usb@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH 0/7][v4] Add OTG support for FSL socs
> 
> Hi
> 
> > -----Original Message-----
> > From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb-
> > owner@xxxxxxxxxxxxxxx] On Behalf Of Felipe Balbi
> > Sent: Wednesday, December 23, 2015 2:21 AM
> > To: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>; linux-
> > kernel@xxxxxxxxxxxxxxx
> > Cc: stern@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-
> > usb@xxxxxxxxxxxxxxx
> > Subject: RE: [PATCH 0/7][v4] Add OTG support for FSL socs
> >
> >
> > Hi,
> >
> > Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx> writes:
> > >> -----Original Message-----
> > >> From: Felipe Balbi [mailto:balbi@xxxxxx]
> > >> Sent: Saturday, October 10, 2015 3:04 AM
> > >> To: Mehresh Ramneek-B31383 <ramneek.mehresh@xxxxxxxxxxxxx>;
> linux-
> > >> kernel@xxxxxxxxxxxxxxx
> > >> Cc: stern@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-
> > >> usb@xxxxxxxxxxxxxxx; Mehresh Ramneek-B31383
> > >> <ramneek.mehresh@xxxxxxxxxxxxx>
> > >> Subject: Re: [PATCH 0/7][v4] Add OTG support for FSL socs
> > >>
> > >> Felipe Balbi <balbi@xxxxxx> writes:
> > >>
> > >> > Hi,
> > >> >
> > >> > Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx> writes:
> > >> >> Add support for otg for all freescale socs having internal usb phy.
> > >> >>
> > >> >> Ramneek Mehresh (7):
> > >> >>   usb:fsl:otg: Make fsl otg driver as tristate
> > >> >>   usb:fsl:otg: Add controller version based ULPI and UTMI phy
> > >> >>   usb:fsl:otg: Add support to add/remove usb host driver
> > >> >>   usb:fsl:otg: Signal host drv when host is otg
> > >> >>   usb:fsl:otg: Modify otg_event to start host drv
> > >> >>   usb:fsl:otg: Combine host/gadget start/resume for ID change
> > >> >>   usb:fsl:otg: Add host-gadget drv sync delay
> > >> >
> > >> > Unless Alan's okay with the host side changes, I can't accept any
> > >> > of these. However, I must say some of the flags you add here
> > >> > already exist in some way, shape or form. For example, look at
> > is_b_host flag.
> > >>
> > >
> > > Could you please be more specific...which flag you think that I
> > >should remove/I'm re-defining. The flags I'm defining are:
> > >
> > > have_hcd : defined in fsl specific structure for fsl specific
> > > use-case
> > >
> > > had_hcd: defined in fsl specific structure for fsl specific use-case
> > >
> > > is_otg : defined in include/linux/usb.h
> > >
> > > Are you suggesting using otg_port or is_b_host instead of is_otg?
> > >
> > > As I understand, is_b_host is specifically to check if an otg B
> > > device is in host mode...correct?  I just need a flag to check if a
> > > controller is capable of otg operations? That's why defined "is_otg"
> > > flag. Please suggest.
> >
> > no, I don't know why I made that comment. You could use otg_port, but
> > that wouldn't look very clean. Can you resend with Alan's ack, then
> > I'll move this series into testing/next.
> >
> > --
> > balbi
> 
> Can you directly put the change_hcd_work in its phy driver(phy-fsl-usb.c)?
> Then add/remove hcd will not through ehci_fsl_drv_suspend/resume, With
> this, you can make it work without a new flag "is_otg".
> 
change_hcd_work() changes host controller mode, and hence, should be in host controller
driver. To move this to phy driver (just to avoid usage of a single flag) won't be a good idea.
In this case, I'll also have to move some host controller specific flags to phy drv which won't be correct.

> Li Jun

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/