RE: [PATCH 0/7][v4] Add OTG support for FSL socs

[Jun Li]

Hi

> -----Original Message-----
> From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Felipe Balbi
> Sent: Wednesday, December 23, 2015 2:21 AM
> To: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>; linux-
> kernel@xxxxxxxxxxxxxxx
> Cc: stern@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-
> usb@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH 0/7][v4] Add OTG support for FSL socs
> 
> 
> Hi,
> 
> Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx> writes:
> >> -----Original Message-----
> >> From: Felipe Balbi [mailto:balbi@xxxxxx]
> >> Sent: Saturday, October 10, 2015 3:04 AM
> >> To: Mehresh Ramneek-B31383 <ramneek.mehresh@xxxxxxxxxxxxx>; linux-
> >> kernel@xxxxxxxxxxxxxxx
> >> Cc: stern@xxxxxxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; linux-
> >> usb@xxxxxxxxxxxxxxx; Mehresh Ramneek-B31383
> >> <ramneek.mehresh@xxxxxxxxxxxxx>
> >> Subject: Re: [PATCH 0/7][v4] Add OTG support for FSL socs
> >>
> >> Felipe Balbi <balbi@xxxxxx> writes:
> >>
> >> > Hi,
> >> >
> >> > Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx> writes:
> >> >> Add support for otg for all freescale socs having internal usb phy.
> >> >>
> >> >> Ramneek Mehresh (7):
> >> >>   usb:fsl:otg: Make fsl otg driver as tristate
> >> >>   usb:fsl:otg: Add controller version based ULPI and UTMI phy
> >> >>   usb:fsl:otg: Add support to add/remove usb host driver
> >> >>   usb:fsl:otg: Signal host drv when host is otg
> >> >>   usb:fsl:otg: Modify otg_event to start host drv
> >> >>   usb:fsl:otg: Combine host/gadget start/resume for ID change
> >> >>   usb:fsl:otg: Add host-gadget drv sync delay
> >> >
> >> > Unless Alan's okay with the host side changes, I can't accept any
> >> > of these. However, I must say some of the flags you add here
> >> > already exist in some way, shape or form. For example, look at
> is_b_host flag.
> >>
> >
> > Could you please be more specific...which flag you think that I should
> >remove/I'm re-defining. The flags I'm defining are:
> >
> > have_hcd : defined in fsl specific structure for fsl specific use-case
> >
> > had_hcd: defined in fsl specific structure for fsl specific use-case
> >
> > is_otg : defined in include/linux/usb.h
> >
> > Are you suggesting using otg_port or is_b_host instead of is_otg?
> >
> > As I understand, is_b_host is specifically to check if an otg B device
> > is in host mode...correct?  I just need a flag to check if a
> > controller is capable of otg operations? That's why defined "is_otg"
> > flag. Please suggest.
> 
> no, I don't know why I made that comment. You could use otg_port, but that
> wouldn't look very clean. Can you resend with Alan's ack, then I'll move
> this series into testing/next.
> 
> --
> balbi

Can you directly put the change_hcd_work in its phy driver(phy-fsl-usb.c)?
Then add/remove hcd will not through ehci_fsl_drv_suspend/resume,
With this, you can make it work without a new flag "is_otg".

Li Jun 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/