Re: [RESEND PATCH v1 4/4] clk: rockchip: rk3036: fix and add node id for emac clock
From: Yakir Yang
Date: Mon Dec 28 2015 - 20:59:16 EST
Hi Heiko,
On 12/28/2015 08:41 PM, Heiko Stübner wrote:
Hi,
Am Montag, 28. Dezember 2015, 17:03:53 schrieb Xing Zheng:
Due to referred old version TRM, there is incorrect emac clock node,
we should fix it. The SEL_21_9 is the parent of SEL_21_4.
In the emac driver, we need to refer HCLK_MAC, and because There are
only 3PLLs (APLL/GPLL/DPLL) on the rk3036, most clock are under the
GPLL, and it is unable to provide the accurate rate for mac_ref which
need to 50MHz probability, we should let it under the APLL and are
able to set the freq which integer multiples of 50MHz, so we add these
emac node for reference.
I don't really follow here. While I do understand that the emac needs 50MHz, I
don't think using the APLL as source is helpful.
The APLL is the main clocksource for the cpu-cores, including frequency
scaling, and while it currently only lists 816MHz as sole frequency, you're
pretty much guaranteed to not get your correct multiple of 50MHz from there
either. And limiting the cpu to just do 600MHz to get the mac working sounds
pretty bad ;-) .
In the rk3036 cru-node the gpll gets set to 594MHz. Is there a special reason
why it needs to be 594MHz and cannot be a round 600MHz? Because that would
also provide your 50MHz-multiple nicely.
Yes, this magic 594MHz would help to support the standard HDMI
resolutions, here are the math:
1920x1080-60Hz DCLK = 148.5MHz = 594MHz / 4
1280x720-60Hz DCLK = 74.25MHz = 594MHz / 8
720x480-60Hz DCLK = 27MHz = 594MHz / 22
Thanks,
- Yakir
Signed-off-by: Xing Zheng <zhengxing@xxxxxxxxxxxxxx>
---
drivers/clk/rockchip/clk-rk3036.c | 11 ++++++-----
include/dt-bindings/clock/rk3036-cru.h | 2 ++
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/rockchip/clk-rk3036.c
b/drivers/clk/rockchip/clk-rk3036.c index 7420cbe..7863c4d 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -328,13 +328,14 @@ static struct rockchip_clk_branch
rk3036_clk_branches[] __initdata = { RK2928_CLKSEL_CON(16), 0, 2, MFLAGS,
2, 5, DFLAGS,
RK2928_CLKGATE_CON(10), 5, GFLAGS),
- COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
- RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+ MUX(SCLK_MACPLL, "mac_pll_pre", mux_pll_src_3plls_p, 0,
+ RK2928_CLKSEL_CON(21), 0, 2, MFLAGS),
+ DIV(0, "mac_pll_src", "mac_pll_pre", 0,
+ RK2928_CLKSEL_CON(21), 9, 5, DFLAGS),
MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
-
COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
- RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+ RK2928_CLKSEL_CON(21), 4, 5, DFLAGS,
RK2928_CLKGATE_CON(2), 6, GFLAGS),
MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
@@ -389,7 +390,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[]
__initdata = { GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(7), 3, GFLAGS), GATE(HCLK_I2S, "hclk_i2s", "hclk_peri",
0, RK2928_CLKGATE_CON(7), 2, GFLAGS), GATE(0, "hclk_sfc", "hclk_peri",
CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), - GATE(0,
"hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
GFLAGS), + GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0,
RK2928_CLKGATE_CON(3), 5, GFLAGS),
/* pclk_peri gates */
GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
RK2928_CLKGATE_CON(4), 1, GFLAGS), diff --git
a/include/dt-bindings/clock/rk3036-cru.h
b/include/dt-bindings/clock/rk3036-cru.h index ebc7a7b..de44109 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -54,6 +54,7 @@
#define SCLK_PVTM_VIDEO 125
#define SCLK_MAC 151
#define SCLK_MACREF 152
+#define SCLK_MACPLL 153
#define SCLK_SFC 160
/* aclk gates */
@@ -92,6 +93,7 @@
please separate the hclk addition into two separate patches:
patch1: add the clock-id to the dt-binding header
patch2: use the clock in the clock-driver
#define HCLK_SDMMC 456
#define HCLK_SDIO 457
#define HCLK_EMMC 459
+#define HCLK_MAC 460
#define HCLK_I2S 462
#define HCLK_LCDC 465
#define HCLK_ROM 467
Thanks
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/