[PATCH v2 19/23] hisi_sas: add v2 code for itct setup and free
From: j00310691
Date: Mon Jan 25 2016 - 12:17:55 EST
From: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 92 ++++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 2c6a753..8b51acf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -353,6 +353,96 @@ static void init_id_frame_v2_hw(struct hisi_hba *hisi_hba)
config_id_frame_v2_hw(hisi_hba, i);
}
+static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ struct domain_device *device = sas_dev->sas_device;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 qw0, device_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
+ struct domain_device *parent_dev = device->parent;
+ struct hisi_sas_port *port = device->port->lldd_port;
+
+ memset(itct, 0, sizeof(*itct));
+
+ /* qw0 */
+ qw0 = 0;
+ switch (sas_dev->dev_type) {
+ case SAS_END_DEVICE:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
+ break;
+ case SAS_SATA_DEV:
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+ qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
+ else
+ qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
+ break;
+ default:
+ dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
+ sas_dev->dev_type);
+ }
+
+ qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
+ (device->max_linkrate << ITCT_HDR_MCR_OFF) |
+ (1 << ITCT_HDR_VLN_OFF) |
+ (port->id << ITCT_HDR_PORT_ID_OFF));
+ itct->qw0 = cpu_to_le64(qw0);
+
+ /* qw1 */
+ memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE);
+ itct->sas_addr = __swab64(itct->sas_addr);
+
+ /* qw2 */
+ itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) |
+ (0xff00ULL << ITCT_HDR_BITLT_OFF) |
+ (0xff00ULL << ITCT_HDR_MCTLT_OFF) |
+ (0xff00ULL << ITCT_HDR_RTOLT_OFF));
+}
+
+static void free_device_v2_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ u64 qw0, dev_id = sas_dev->device_id;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
+ u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+ int i;
+
+ /* clear the itct interrupt state */
+ if (ENT_INT_SRC3_ITC_INT_MSK & reg_val)
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+ ENT_INT_SRC3_ITC_INT_MSK);
+
+ /* clear the itct int*/
+ for (i = 0; i < 2; i++) {
+ /* clear the itct table*/
+ reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
+ reg_val |= ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
+ hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
+
+ udelay(10);
+ reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+ if (ENT_INT_SRC3_ITC_INT_MSK & reg_val) {
+ dev_dbg(dev, "got clear ITCT done interrupt\n");
+
+ /* invalid the itct state*/
+ qw0 = cpu_to_le64(itct->qw0);
+ qw0 &= ~(1 << ITCT_HDR_VALID_OFF);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+ ENT_INT_SRC3_ITC_INT_MSK);
+ hisi_hba->devices[dev_id].dev_type = SAS_PHY_UNUSED;
+ hisi_hba->devices[dev_id].dev_status = HISI_SAS_DEV_NORMAL;
+
+ /* clear the itct */
+ hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
+ dev_dbg(dev, "clear ITCT ok\n");
+ break;
+ }
+ }
+}
+
static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
{
int i, reset_val;
@@ -1463,8 +1553,10 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v2_hw = {
.hw_init = hisi_sas_v2_init,
+ .setup_itct = setup_itct_v2_hw,
.sl_notify = sl_notify_v2_hw,
.get_wideport_bitmap = get_wideport_bitmap_v2_hw,
+ .free_device = free_device_v2_hw,
.prep_smp = prep_smp_v2_hw,
.prep_ssp = prep_ssp_v2_hw,
.get_free_slot = get_free_slot_v2_hw,
--
1.9.1