[PATCH] dmaengine: edma: Remove dynamic TPTC power management feature

From: Peter Ujfalusi
Date: Wed Jan 27 2016 - 04:12:45 EST


The dynamic or on demand pm_runtime does not work correctly on am335x and
am437x due to interference with hwmod.
Fall back using the pm_runtime usage as it was in the old driver stack,
meaning that at probe time call pm_runtime_enable() and
pm_runtime_get_sync() for the TPTCs as well.

Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Reported-by: Tero Kristo <t-kristo@xxxxxx>
---
drivers/dma/edma.c | 38 +++-----------------------------------
1 file changed, 3 insertions(+), 35 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index d92d65549406..c1b052f7b68c 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1560,32 +1560,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}

-static void edma_tc_set_pm_state(struct edma_tc *tc, bool enable)
-{
- struct platform_device *tc_pdev;
- int ret;
-
- if (!IS_ENABLED(CONFIG_OF) || !tc)
- return;
-
- tc_pdev = of_find_device_by_node(tc->node);
- if (!tc_pdev) {
- pr_err("%s: TPTC device is not found\n", __func__);
- return;
- }
- if (!pm_runtime_enabled(&tc_pdev->dev))
- pm_runtime_enable(&tc_pdev->dev);
-
- if (enable)
- ret = pm_runtime_get_sync(&tc_pdev->dev);
- else
- ret = pm_runtime_put_sync(&tc_pdev->dev);
-
- if (ret < 0)
- pr_err("%s: pm_runtime_%s_sync() failed for %s\n", __func__,
- enable ? "get" : "put", dev_name(&tc_pdev->dev));
-}
-
/* Alloc channel resources */
static int edma_alloc_chan_resources(struct dma_chan *chan)
{
@@ -1622,8 +1596,6 @@ static int edma_alloc_chan_resources(struct dma_chan *chan)
EDMA_CHAN_SLOT(echan->ch_num), chan->chan_id,
echan->hw_triggered ? "HW" : "SW");

- edma_tc_set_pm_state(echan->tc, true);
-
return 0;

err_slot:
@@ -1660,7 +1632,6 @@ static void edma_free_chan_resources(struct dma_chan *chan)
echan->alloced = false;
}

- edma_tc_set_pm_state(echan->tc, false);
echan->tc = NULL;
echan->hw_triggered = false;

@@ -2369,10 +2340,8 @@ static int edma_pm_suspend(struct device *dev)
int i;

for (i = 0; i < ecc->num_channels; i++) {
- if (echan[i].alloced) {
+ if (echan[i].alloced)
edma_setup_interrupt(&echan[i], false);
- edma_tc_set_pm_state(echan[i].tc, false);
- }
}

return 0;
@@ -2402,8 +2371,6 @@ static int edma_pm_resume(struct device *dev)

/* Set up channel -> slot mapping for the entry slot */
edma_set_chmap(&echan[i], echan[i].slot[0]);
-
- edma_tc_set_pm_state(echan[i].tc, true);
}
}

@@ -2427,7 +2394,8 @@ static struct platform_driver edma_driver = {

static int edma_tptc_probe(struct platform_device *pdev)
{
- return 0;
+ pm_runtime_enable(&pdev->dev);
+ return pm_runtime_get_sync(&pdev->dev);
}

static struct platform_driver edma_tptc_driver = {
--
2.7.0