Re: [PATCH v5 05/10] Input: synaptics-rmi4: Add device tree support for 2d sensors and F11

[Rob Herring]

On Wed, Feb 10, 2016 at 02:24:34PM -0800, Andrew Duggan wrote:
> 2D sensors have several parameter which can be set in the platform data.
> This patch adds support for getting those values from devicetree.
> 
> Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
> ---
>  .../bindings/input/rmi4/rmi_2d_sensor.txt          |  56 +++++++++++
>  .../bindings/input/touchscreen/touchscreen.txt     |   2 +
>  drivers/input/rmi4/rmi_2d_sensor.c                 | 108 +++++++++++++++++++++
>  drivers/input/rmi4/rmi_2d_sensor.h                 |   3 +
>  drivers/input/rmi4/rmi_f11.c                       |   7 +-
>  5 files changed, 175 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt

[...]

> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
> index ac23caf..d6674de 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
> @@ -18,6 +18,8 @@ Optional properties for Touchscreens:
>   - touchscreen-inverted-y	: Y axis is inverted (boolean)
>   - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
>  				  Swapping is done after inverting the axis
> + - touchscreen-mm-x		: horizontal length in mm of the touchscreen
> + - touchscreen-mm-y		: vertical length in mm of the touchscreen

As I mentioned on v3, put the units on the end.

Rob