[PATCH v3 11/52] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate

From: Boris Brezillon
Date: Thu Feb 25 2016 - 19:59:53 EST


The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
drivers/mtd/nand/lpc32xx_slc.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 3b8f373..10cf8e62 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -604,7 +604,8 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
int oob_required, int page)
{
struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
- int stat, i, status;
+ struct mtd_oob_region oobregion = { };
+ int stat, i, status, error;
uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];

/* Issue read command */
@@ -620,7 +621,11 @@ static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);

/* Pointer to ECC data retrieved from NAND spare area */
- oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (error)
+ return error;
+
+ oobecc = chip->oob_poi + oobregion.offset;

for (i = 0; i < chip->ecc.steps; i++) {
stat = chip->ecc.correct(mtd, buf, oobecc,
@@ -666,7 +671,8 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
int oob_required, int page)
{
struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
- uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ struct mtd_oob_region oobregion = { };
+ uint8_t *pb;
int error;

/* Write data, calculate ECC on outbound data */
@@ -678,6 +684,11 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
* The calculated ECC needs some manual work done to it before
* committing it to NAND. Process the calculated ECC and place
* the resultant values directly into the OOB buffer. */
+ error = mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (error)
+ return error;
+
+ pb = chip->oob_poi + oobregion.offset;
lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);

/* Write ECC data to device */
--
2.1.4