[PATCH 1/2] pinctrl: sunxi: Remove non existing irq's

[Henry Paulissen]

While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".

This so called manual (A20 user manual v1.3 dated 2014-10-10) says:

Pin overview:
    Page 233:       EINT12 is on pin PC19 mux6.
    Page 236:       EINT12 is on pin PH12 mux6.

Now, it is a bit strange to have the same IRQ on 2 different pins,
but I guess this could still be possible hardware wise. But then:

Pin registers:
    Page 253:       EINT12 is *not* on pin PC19.
    Page 281:       EINT12 is on pin PH12.

The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.

This patch is based on actual outcome of these tests and not what
the manual says.

Test procedure used:

Connect a 1 pulse per second (GPS) line to the pin.

echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge

Check /proc/interrupts if a irq was attached and if irq's where
received.

Signed-off-by: Henry Paulissen <henry@xxxxxxxxxxxxxxxx>
---
 drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index cf1ce0c..25748b4 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -343,26 +343,22 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE4 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* CS0 */
-		  SUNXI_FUNCTION_IRQ(0x6, 12)),		/* EINT12 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CS0 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 20),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE5 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* CLK */
-		  SUNXI_FUNCTION_IRQ(0x6, 13)),		/* EINT13 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CLK */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 21),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE6 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* MOSI */
-		  SUNXI_FUNCTION_IRQ(0x6, 14)),		/* EINT14 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MOSI */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 22),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE7 */
-		  SUNXI_FUNCTION(0x3, "spi2"),		/* MISO */
-		  SUNXI_FUNCTION_IRQ(0x6, 15)),		/* EINT15 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MISO */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 23),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-- 
2.5.0