Re: [PATCH] net: mvneta: Add missing hotplug notifier transition

From: Gregory CLEMENT
Date: Fri Mar 11 2016 - 05:29:16 EST


Hi Anna-Maria,

On ven., mars 11 2016, Anna-Maria Gleixner <anna-maria@xxxxxxxxxxxxx> wrote:

> The mvneta_percpu_notifier() hotplug callback lacks handling of the
> CPU_DOWN_FAILED case. That means, if CPU_DOWN_PREPARE failes, the
> driver is not well configured on the CPU.
>
> Add handling for CPU_DOWN_FAILED[_FROZEN] hotplug notifier transition
> to setup the driver.

I agree that we need to handle this case, however reusing CPU_ONLINE
case for it seems too much. Indeed in the case of a CPU down failure all
the napi are already synchronized thanks to the CPU_DOWN_PREPARE
case. Moreover, we didn't call yet mvneta_percpu_elect() so we don't have
to call it again. I would prefer something like that:

@@ -2987,6 +2987,23 @@ static int mvneta_percpu_notifier(struct notifier_block *nfb,
pp, true);

break;
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ /* Re-enable per-CPU interrupts on the CPU that failed
+ * to bring up.
+ */
+ smp_call_function_single(cpu, mvneta_percpu_enable,
+ pp, true);
+
+ napi_enable(&port->napi);
+ /* Unmask all ethernet port interrupts */
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK,
+ MVNETA_CAUSE_PHY_STATUS_CHANGE |
+ MVNETA_CAUSE_LINK_CHANGE |
+ MVNETA_CAUSE_PSC_SYNC_CHANGE);
+ netif_tx_start_all_queues(pp->dev);
+ break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
/* Check if a new CPU must be elected now this on is down */


Also it would be nice to appy this fix on the stable kernel, the bug was
introduced with this commit: f86428854480 ("net: mvneta: Statically
assign queues to CPUs")

Thanks,

Gregory

>
> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> Cc: netdev@xxxxxxxxxxxxxxx
> Signed-off-by: Anna-Maria Gleixner <anna-maria@xxxxxxxxxxxxx>
> ---
> drivers/net/ethernet/marvell/mvneta.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -2920,6 +2920,8 @@ static int mvneta_percpu_notifier(struct
> switch (action) {
> case CPU_ONLINE:
> case CPU_ONLINE_FROZEN:
> + case CPU_DOWN_FAILED:
> + case CPU_DOWN_FAILED_FROZEN:
> spin_lock(&pp->lock);
> /* Configuring the driver for a new CPU while the
> * driver is stopping is racy, so just avoid it.

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com