Re: [PATCH V7 05/12] thermal: tegra: add Tegra210 specific SOC_THERM driver

From: Wei Ni
Date: Tue Mar 15 2016 - 02:59:55 EST




On 2016å03æ15æ 02:57, Eduardo Valentin wrote:
> * PGP Signed by an unknown key
>
> On Fri, Mar 11, 2016 at 11:10:25AM +0800, Wei Ni wrote:
>> Add Tegra210 specific SOC_THERM driver.
>>
>> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
>> ---
>> drivers/thermal/tegra/Makefile | 1 +
>> drivers/thermal/tegra/soctherm-fuse.c | 11 ++
>> drivers/thermal/tegra/soctherm.c | 6 ++
>> drivers/thermal/tegra/soctherm.h | 4 +
>> drivers/thermal/tegra/tegra210-soctherm.c | 173 ++++++++++++++++++++++++++++++
>
> No Kconfig change?

Yes, we doesn't need Kconfig change.

As discussed with Thierry in [V1,03/10] thermal: tegra: split tegra_soctherm
driver, he said:
"I'd like to do this differently to reduce the number of Kconfig symbols.
The alternate proposal would be for the TEGRA_SOCTHERM symbol to remain
as it is and then build in driver support depending on the selected
ARCH_TEGRA_*_SOC options."

So we only have "config TEGRA_SOCTHERM" in the Kconfig, and in Makefile, we add
tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-soctherm.o

>
>> 5 files changed, 195 insertions(+)
>> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>>
>> diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
>> index d5fb15377b97..bf9e028eba28 100644
>> --- a/drivers/thermal/tegra/Makefile
>> +++ b/drivers/thermal/tegra/Makefile
>> @@ -2,3 +2,4 @@ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra-soctherm.o
>>
>> tegra-soctherm-y := soctherm.o soctherm-fuse.o
>> tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
>> +tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-soctherm.o
>> diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c
>> index 931c299ab0e8..29963180c453 100644
>> --- a/drivers/thermal/tegra/soctherm-fuse.c
>> +++ b/drivers/thermal/tegra/soctherm-fuse.c
>> @@ -28,7 +28,18 @@
>> #define FUSE_TSENSOR_COMMON 0x180
>>
>> /*
>> + * Tegra210: Layout of bits in FUSE_TSENSOR_COMMON:
>> + * 3 2 1 0
>> + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
>> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>> + * | BASE_FT | BASE_CP | SHFT_FT | SHIFT_CP |
>> + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>> + *
>> * Tegra12x, etc:
>> + * In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits,
>> + * and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits
>> + * were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0].
>> + *
>> * FUSE_TSENSOR_COMMON:
>> * 3 2 1 0
>> * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
>> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
>> index f56e5a11384e..52a33760e8e8 100644
>> --- a/drivers/thermal/tegra/soctherm.c
>> +++ b/drivers/thermal/tegra/soctherm.c
>> @@ -147,6 +147,12 @@ static const struct of_device_id tegra_soctherm_of_match[] = {
>> .data = &tegra124_soctherm,
>> },
>> #endif
>> +#ifdef CONFIG_ARCH_TEGRA_210_SOC
>> + {
>> + .compatible = "nvidia,tegra210-soctherm",
>> + .data = &tegra210_soctherm,
>> + },
>> +#endif
>> { },
>> };
>> MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
>> diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
>> index f80ee1492ddb..69d317269af1 100644
>> --- a/drivers/thermal/tegra/soctherm.h
>> +++ b/drivers/thermal/tegra/soctherm.h
>> @@ -106,5 +106,9 @@ int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
>> extern const struct tegra_soctherm_soc tegra124_soctherm;
>> #endif
>>
>> +#ifdef CONFIG_ARCH_TEGRA_210_SOC
>> +extern const struct tegra_soctherm_soc tegra210_soctherm;
>> +#endif
>
> Is CONFIG_ARCH_TEGRA_210_SOC going to be tristate?
>
> If only bool, do you need to make the symbol extern?

This config is the bool, it already defined in:
drivers/soc/tegra/Kconfig

>
>> --
>> 1.9.1
>>
>
> * Unknown Key
> * 0x7DA4E256
>