[PATCH v2 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Heiko Stuebner]

The emmc-phy occupies a contiguous set of 8 registers inside the general
register files, so the reg property should specify this.

Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
This is essential a counter argument for Shawn's move from reg to reg_offset
in "phy: rockchip-emmc: fix compile issue on arm64 platform" [0].
With the move under the grf we now also are able to specify this stuff
cleanly using already present mechanisms.

Also meant to v4.6-rc before the binding solidifies.


[0] https://lkml.org/lkml/2016/3/8/114

 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 461e958..555cb0f 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -4,7 +4,7 @@ Rockchip EMMC PHY
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
@@ -12,12 +12,14 @@ Example:
 
 grf: syscon@ff770000 {
 	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 ...
 
 	emmcphy: phy@f780 {
 		compatible = "rockchip,rk3399-emmc-phy";
-		reg = <0xf780>;
+		reg = <0xf780 0x20>;
 		#phy-cells = <0>;
 	};
 };
-- 
2.7.0