Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE

From: Lee Jones
Date: Thu Apr 07 2016 - 04:02:43 EST

Next message: Mike Galbraith: "Re: [PATCHSET RFC cgroup/for-4.6] cgroup, sched: implement resource group and PRIO_RGRP"
Previous message: Ulf Hansson: "[PATCH] mmc: block: Use the mmc host device index as the mmcblk device index"
In reply to: Grygorii Strashko: "Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 29 Mar 2016, Paul Kocialkowski wrote:

> Since the twl-core mfd driver is not limited to twl4030 support, but also
> supports other chips of the TWL family, it makes sense to rename its matching
> Kconfig opton to a non-model-specific name.

No, it doesn't. The naming convention is; unless there was already
forethought to make the name generic, it should be kept as the first
supported device i.e. in this case TWL4030.

It's also helpful if you Cc *all* of the maintainers for subsystems
you are attempting to make changes in.

> Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> ---
> arch/arm/mach-omap2/Kconfig | 2 +-
> arch/arm/mach-omap2/Makefile | 2 +-
> arch/arm/mach-omap2/pm.h | 2 +-
> arch/arm/plat-omap/Kconfig | 2 +-
> drivers/gpio/Kconfig | 2 +-
> drivers/iio/adc/Kconfig | 4 ++--
> drivers/input/keyboard/Kconfig | 2 +-
> drivers/input/misc/Kconfig | 4 ++--
> drivers/mfd/Kconfig | 6 +++---
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/twl4030-irq.c | 6 +++---
> drivers/phy/Kconfig | 2 +-
> drivers/power/Kconfig | 2 +-
> drivers/pwm/Kconfig | 4 ++--
> drivers/regulator/Kconfig | 2 +-
> drivers/rtc/Kconfig | 2 +-
> drivers/usb/phy/Kconfig | 2 +-
> drivers/video/backlight/Kconfig | 2 +-
> drivers/watchdog/Kconfig | 2 +-
> include/linux/i2c/twl.h | 4 ++--
> sound/soc/codecs/Kconfig | 2 +-
> sound/soc/omap/Kconfig | 4 ++--
> 22 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 0517f0c..ada4c7a1 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -124,7 +124,7 @@ config ARCH_OMAP2PLUS_TYPICAL
> select PM
> select REGULATOR
> select REGULATOR_FIXED_VOLTAGE
> - select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
> + select TWL_CORE if ARCH_OMAP3 || ARCH_OMAP4
> select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
> select VFP
> help
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 0ba6a0e..6eb680a 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -27,7 +27,7 @@ ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
> obj-y += mcbsp.o
> endif
>
> -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
> +obj-$(CONFIG_TWL_CORE) += omap_twl.o
> obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
>
> # SMP support ONLY available for OMAP4
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index b668719..bf4dac2 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -123,7 +123,7 @@ static inline int omap_devinit_smartreflex(void)
> static inline void omap_enable_smartreflex_on_init(void) {}
> #endif
>
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
> extern int omap3_twl_init(void);
> extern int omap4_twl_init(void);
> extern int omap3_twl_set_sr_bit(bool enable);
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index d055db3..8631a45 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -44,7 +44,7 @@ config POWER_AVS_OMAP
>
> config POWER_AVS_OMAP_CLASS3
> bool "Class 3 mode of Smartreflex Implementation"
> - depends on POWER_AVS_OMAP && TWL4030_CORE
> + depends on POWER_AVS_OMAP && TWL_CORE
> help
> Say Y to enable Class 3 implementation of Smartreflex
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 5f3429f..62ca9b4 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -933,7 +933,7 @@ config GPIO_TPS65912
>
> config GPIO_TWL4030
> tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> Say yes here to access the GPIO signals of various multi-function
> power management chips from Texas Instruments.
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index af4aea7..3360492 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -440,7 +440,7 @@ config TI_AM335X_ADC
>
> config TWL4030_MADC
> tristate "TWL4030 MADC (Monitoring A/D Converter)"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> This driver provides support for Triton TWL4030-MADC. The
> driver supports both RT and SW conversion methods.
> @@ -450,7 +450,7 @@ config TWL4030_MADC
>
> config TWL6030_GPADC
> tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> default n
> help
> Say yes here if you want support for the TWL6030/TWL6032 General
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 509608c..9cfa09b 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -653,7 +653,7 @@ config KEYBOARD_TC3589X
>
> config KEYBOARD_TWL4030
> tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> select INPUT_MATRIXKMAP
> help
> Say Y here if your board use the keypad controller on
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 1f2337a..6abb6df 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -461,7 +461,7 @@ config INPUT_AXP20X_PEK
>
> config INPUT_TWL4030_PWRBUTTON
> tristate "TWL4030 Power button Driver"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> Say Y here if you want to enable power key reporting via the
> TWL4030 family of chips.
> @@ -471,7 +471,7 @@ config INPUT_TWL4030_PWRBUTTON
>
> config INPUT_TWL4030_VIBRA
> tristate "Support for TWL4030 Vibrator"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> select MFD_TWL4030_AUDIO
> select INPUT_FF_MEMLESS
> help
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index eea61e3..28bfe3d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1266,7 +1266,7 @@ config MFD_TPS80031
> ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
> Power Path from USB, 32K clock generator.
>
> -config TWL4030_CORE
> +config TWL_CORE
> bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
> depends on I2C=y
> select IRQ_DOMAIN
> @@ -1284,7 +1284,7 @@ config TWL4030_CORE
>
> config TWL4030_POWER
> bool "TI TWL4030 power resources"
> - depends on TWL4030_CORE && ARM
> + depends on TWL_CORE && ARM
> help
> Say yes here if you want to use the power resources on the
> TWL4030 family chips. Most of these resources are regulators,
> @@ -1297,7 +1297,7 @@ config TWL4030_POWER
>
> config MFD_TWL4030_AUDIO
> bool "TI TWL4030 Audio"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> select MFD_CORE
> default n
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5eaa6465d..7daeab5 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -81,7 +81,7 @@ obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
> obj-$(CONFIG_MFD_TPS80031) += tps80031.o
> obj-$(CONFIG_MENELAUS) += menelaus.o
>
> -obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
> +obj-$(CONFIG_TWL_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
> obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
> obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
> obj-$(CONFIG_TWL6040_CORE) += twl6040.o
> diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
> index 40e51b0..52dc294 100644
> --- a/drivers/mfd/twl4030-irq.c
> +++ b/drivers/mfd/twl4030-irq.c
> @@ -54,7 +54,7 @@
> * base + 8 .. base + 15 SIH for PWR_INT
> * base + 16 .. base + 33 SIH for GPIO
> */
> -#define TWL4030_CORE_NR_IRQS 8
> +#define TWL_CORE_NR_IRQS 8
> #define TWL4030_PWR_NR_IRQS 8
>
> /* PIH register offsets */
> @@ -693,7 +693,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
> * the hwirqs numbers are defined contiguously from 1 to 15.
> * Create only one domain for both.
> */
> - nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
> + nr_irqs = TWL4030_PWR_NR_IRQS + TWL_CORE_NR_IRQS;
>
> irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
> if (IS_ERR_VALUE(irq_base)) {
> @@ -704,7 +704,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
> irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
> &irq_domain_simple_ops, NULL);
>
> - irq_end = irq_base + TWL4030_CORE_NR_IRQS;
> + irq_end = irq_base + TWL_CORE_NR_IRQS;
>
> /*
> * Mask and clear all TWL4030 interrupts since initially we do
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..6193565 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -164,7 +164,7 @@ config TI_PIPE3
>
> config TWL4030_USB
> tristate "TWL4030 USB Transceiver Driver"
> - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> + depends on TWL_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> depends on USB_SUPPORT
> select GENERIC_PHY
> select USB_PHY
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 421770d..cc5fe9a 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -323,7 +323,7 @@ config CHARGER_MAX8903
>
> config CHARGER_TWL4030
> tristate "OMAP TWL4030 BCI charger driver"
> - depends on IIO && TWL4030_CORE
> + depends on IIO && TWL_CORE
> help
> Say Y here to enable support for TWL4030 Battery Charge Interface.
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index c182efc..6318f19 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -413,7 +413,7 @@ config PWM_TIPWMSS
>
> config PWM_TWL
> tristate "TWL4030/6030 PWM support"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> Generic PWM framework driver for TWL4030/6030.
>
> @@ -422,7 +422,7 @@ config PWM_TWL
>
> config PWM_TWL_LED
> tristate "TWL4030/6030 PWM support for LED drivers"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> Generic PWM framework driver for TWL4030/6030 LED terminals.
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index c77dc08..b62b4b4 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -803,7 +803,7 @@ config REGULATOR_TPS80031
>
> config REGULATOR_TWL4030
> tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> This driver supports the voltage regulators provided by
> this family of companion chips.
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 3e84315..198ac54 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -462,7 +462,7 @@ config RTC_DRV_TWL92330
>
> config RTC_DRV_TWL4030
> tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> If you say yes here you get support for the RTC on the
> TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index c690474..2911b11 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -80,7 +80,7 @@ config SAMSUNG_USBPHY
>
> config TWL6030_USB
> tristate "TWL6030 USB Transceiver Driver"
> - depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
> + depends on TWL_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
> help
> Enable this to support the USB OTG transceiver on TWL6030
> family chips. This TWL6030 transceiver has the VBUS and ID GND
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 5ffa4b4..8d6e4e0 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -412,7 +412,7 @@ config BACKLIGHT_OT200
>
> config BACKLIGHT_PANDORA
> tristate "Backlight driver for Pandora console"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> help
> If you have a Pandora console, say Y to enable the
> backlight driver.
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fb94765..4b24418 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -462,7 +462,7 @@ config COH901327_WATCHDOG
>
> config TWL4030_WATCHDOG
> tristate "TWL4030 Watchdog"
> - depends on TWL4030_CORE
> + depends on TWL_CORE
> select WATCHDOG_CORE
> help
> Support for TI TWL4030 watchdog. Say 'Y' here to enable the
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 4e7ea5f..2decb190 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -214,7 +214,7 @@ int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
> int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>
> /* Card detect Configuration for MMC1 Controller on OMAP4 */
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
> int twl6030_mmc_card_detect_config(void);
> #else
> static inline int twl6030_mmc_card_detect_config(void)
> @@ -225,7 +225,7 @@ static inline int twl6030_mmc_card_detect_config(void)
> #endif
>
> /* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
> int twl6030_mmc_card_detect(struct device *dev, int slot);
> #else
> static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 649e92a..009feb4 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -134,7 +134,7 @@ config SND_SOC_ALL_CODECS
> select SND_SOC_TPA6130A2 if I2C
> select SND_SOC_TLV320DAC33 if I2C
> select SND_SOC_TS3A227E if I2C
> - select SND_SOC_TWL4030 if TWL4030_CORE
> + select SND_SOC_TWL4030 if TWL_CORE
> select SND_SOC_TWL6040 if TWL6040_CORE
> select SND_SOC_UDA134X
> select SND_SOC_UDA1380 if I2C
> diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
> index 5185a38..49af002 100644
> --- a/sound/soc/omap/Kconfig
> +++ b/sound/soc/omap/Kconfig
> @@ -85,7 +85,7 @@ config SND_OMAP_SOC_AM3517EVM
>
> config SND_OMAP_SOC_OMAP_TWL4030
> tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
> - depends on TWL4030_CORE && SND_OMAP_SOC
> + depends on TWL_CORE && SND_OMAP_SOC
> select SND_OMAP_SOC_MCBSP
> select SND_SOC_TWL4030
> help
> @@ -117,7 +117,7 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040
>
> config SND_OMAP_SOC_OMAP3_PANDORA
> tristate "SoC Audio support for OMAP3 Pandora"
> - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
> + depends on TWL_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
> select SND_OMAP_SOC_MCBSP
> select SND_SOC_TWL4030
> help

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Next message: Mike Galbraith: "Re: [PATCHSET RFC cgroup/for-4.6] cgroup, sched: implement resource group and PRIO_RGRP"
Previous message: Ulf Hansson: "[PATCH] mmc: block: Use the mmc host device index as the mmcblk device index"
In reply to: Grygorii Strashko: "Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]