Re: [PATCH resend v2 0/9] mfd: axp20x: Add support for AXP809 PMIC

[Chen-Yu Tsai]

Hi Lee,

On Tue, Mar 29, 2016 at 5:22 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> Hi everyone,
>
> This is a resend of v2 of the AXP809 PMIC support series. This adds
> support for X-Powers' AXP809 PMIC. This is the primary PMIC accompanying
> Allwinner's A80 SoC. For now, only the power button (PEK) and regulators
> are supported. These are supported using existing axp20x drivers.
>
> Driver patches are based on v4.6-rc1, while DT patches are based on
> Maxime's sunxi/dt-for-4.7 branch.

Any news on this series? It's been almost 2 weeks since I reposted
them for 4.7, and longer since I first posted v2.


Regards
ChenYu


> Some regulator patches were merged into v4.6-rc1. Those have been
> dropped from this series. Other than that there are no changes.
>
> Patch 1 adds a MAINTAINERS entry for the X-Powers AXP PMICs.
> I list myself as the maintainer.
>
> Patch 2 adds AXP809 to the axp20x bindings.
>
> Patch 3 adds AXP809 support to the axp20x mfd driver.
>
> Patch 4 adds AXP809 support to the axp20x regulator driver.
> This patch depends on patch 3.
>
> Patch 5 adds a dtsi file for AXP809.
>
> Patch 6 enables AXP809 support on the A80 Optimus board.
>
> Patch 7 enables AXP809 support on the Cubieboard 4.
>
> Patch 8 disables the dummy regulators from sunxi-common-regulators.dtsi
> on the A80 Optimus board. These aren't used in the board DTS anymore.
>
> Patch 9 disables the dummy regulators from sunxi-common-regulators.dtsi,
> on the Cubieboard4. These aren't used in the board DTS anymore.
>
>
> Regards
> ChenYu
>
> Chen-Yu Tsai (9):
>   MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers
>   mfd: axp20x: Add bindings for AXP809 PMIC
>   mfd: axp20x: Add support for AXP809 PMIC
>   regulator: axp20x: support AXP809 variant
>   ARM: dts: sunxi: Add dtsi file for AXP809 PMIC
>   ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and
>     regulators
>   ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and
>     regulators
>   ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3,
>     vcc5v0
>   ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3,
>     vcc5v0
>
>  Documentation/devicetree/bindings/mfd/axp20x.txt   |  31 ++++-
>  MAINTAINERS                                        |   6 +
>  .../dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} |  98 ++------------
>  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts        | 143 ++++++++++++++++++++-
>  arch/arm/boot/dts/sun9i-a80-optimus.dts            | 143 ++++++++++++++++++++-
>  drivers/mfd/axp20x-rsb.c                           |   1 +
>  drivers/mfd/axp20x.c                               |  79 ++++++++++++
>  drivers/regulator/axp20x-regulator.c               | 119 ++++++++++++-----
>  include/linux/mfd/axp20x.h                         |  59 +++++++++
>  9 files changed, 554 insertions(+), 125 deletions(-)
>  copy arch/arm/boot/dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} (52%)
>
> --
> 2.7.0
>