Re: [PATCH resend v2 0/9] mfd: axp20x: Add support for AXP809 PMIC

[Lee Jones]

On Mon, 11 Apr 2016, Chen-Yu Tsai wrote:
> On Tue, Mar 29, 2016 at 5:22 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> > Hi everyone,
> >
> > This is a resend of v2 of the AXP809 PMIC support series. This adds
> > support for X-Powers' AXP809 PMIC. This is the primary PMIC accompanying
> > Allwinner's A80 SoC. For now, only the power button (PEK) and regulators
> > are supported. These are supported using existing axp20x drivers.
> >
> > Driver patches are based on v4.6-rc1, while DT patches are based on
> > Maxime's sunxi/dt-for-4.7 branch.
> 
> Any news on this series? It's been almost 2 weeks since I reposted
> them for 4.7, and longer since I first posted v2.

Nope, no news yet.

I'm swamped and will get round to them in good time.

> > Some regulator patches were merged into v4.6-rc1. Those have been
> > dropped from this series. Other than that there are no changes.
> >
> > Patch 1 adds a MAINTAINERS entry for the X-Powers AXP PMICs.
> > I list myself as the maintainer.
> >
> > Patch 2 adds AXP809 to the axp20x bindings.
> >
> > Patch 3 adds AXP809 support to the axp20x mfd driver.
> >
> > Patch 4 adds AXP809 support to the axp20x regulator driver.
> > This patch depends on patch 3.
> >
> > Patch 5 adds a dtsi file for AXP809.
> >
> > Patch 6 enables AXP809 support on the A80 Optimus board.
> >
> > Patch 7 enables AXP809 support on the Cubieboard 4.
> >
> > Patch 8 disables the dummy regulators from sunxi-common-regulators.dtsi
> > on the A80 Optimus board. These aren't used in the board DTS anymore.
> >
> > Patch 9 disables the dummy regulators from sunxi-common-regulators.dtsi,
> > on the Cubieboard4. These aren't used in the board DTS anymore.
> >
> >
> > Regards
> > ChenYu
> >
> > Chen-Yu Tsai (9):
> >   MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers
> >   mfd: axp20x: Add bindings for AXP809 PMIC
> >   mfd: axp20x: Add support for AXP809 PMIC
> >   regulator: axp20x: support AXP809 variant
> >   ARM: dts: sunxi: Add dtsi file for AXP809 PMIC
> >   ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and
> >     regulators
> >   ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and
> >     regulators
> >   ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3,
> >     vcc5v0
> >   ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3,
> >     vcc5v0
> >
> >  Documentation/devicetree/bindings/mfd/axp20x.txt   |  31 ++++-
> >  MAINTAINERS                                        |   6 +
> >  .../dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} |  98 ++------------
> >  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts        | 143 ++++++++++++++++++++-
> >  arch/arm/boot/dts/sun9i-a80-optimus.dts            | 143 ++++++++++++++++++++-
> >  drivers/mfd/axp20x-rsb.c                           |   1 +
> >  drivers/mfd/axp20x.c                               |  79 ++++++++++++
> >  drivers/regulator/axp20x-regulator.c               | 119 ++++++++++++-----
> >  include/linux/mfd/axp20x.h                         |  59 +++++++++
> >  9 files changed, 554 insertions(+), 125 deletions(-)
> >  copy arch/arm/boot/dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} (52%)
> >
> >

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog