Re: [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees

[Olivier Blin]

Stephen Warren <swarren@xxxxxxxxxxxxx> writes:

> On 02/04/2016 12:36 AM, Lubomir Rintel wrote:
>> The hub and the ethernet in its port 1 are hardwired on the board.
>> 
>> Compared to the adapters that can be plugged into the USB ports, this
>> one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi
>> has the MAC address for this adapter in its ROM, accessible from its
>> firmware.
>> 
>> U-Boot can read out the address and set the local-mac-address property of the
>> node with "ethernet" alias. Let's add the node so that U-Boot can do its
>> business.
>> 
>> Model B rev2 and Model B+ entries were verified by me, the hierarchy and
>> pid/vid pair for the Version 2 was provided by Olivier Blin. Original
>> Model B is a blind short, though very likely correct.
>
> The series,
> Tested-by: Stephen Warren <swarren@xxxxxxxxxxxxx>
>
> A few nits though...
[...]

Is this still being queued in some tree?
Or does it need more fixes and a resubmit?

Without this, Raspberry Pi devices boot with a random MAC address.

-- 
Olivier Blin - blino