Re: [PATCH 2/3] MIPS: smp-cps: Clear Status IPL field when using EIC

[Matt Redfearn]

On 17/05/16 15:31, Paul Burton wrote:
> When using an external interrupt controller (EIC) the interrupt mask
> bits in the cop0 Status register are reused for the Interrupt Priority
> Level, and any interrupts with a priority lower than the field will be
> ignored. Clear the field to 0 by default such that all interrupts are
> serviced.
>
> Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
> ---
>
>   arch/mips/kernel/smp-cps.c | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
> index 253e140..f19f0d3 100644
> --- a/arch/mips/kernel/smp-cps.c
> +++ b/arch/mips/kernel/smp-cps.c
> @@ -307,8 +307,12 @@ static void cps_init_secondary(void)
>   	if (cpu_has_mipsmt)
>   		dmt();
>   
> -	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
> -				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
> +	if (cpu_has_veic)
> +		clear_c0_status(ST0_IM);
> +	else
> +		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
> +					 STATUSF_IP4 | STATUSF_IP5 |
> +					 STATUSF_IP6 | STATUSF_IP7);
>   }
>   
>   static void cps_smp_finish(void)
Hi Paul

Reviewed-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
Tested-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>

Thanks,
Matt