Re: [RESEND][PATCH] mtd: devices: m25p80: add support for mmap read request

From: Michal Suchanek
Date: Wed May 18 2016 - 05:24:20 EST


Hello,

On 29 March 2016 at 07:46, Vignesh R <vigneshr@xxxxxx> wrote:
> Certain SPI controllers may provide accelerated hardware interface to
> read from m25p80 type flash devices in order to provide better read
> performance. SPI core supports such devices with spi_flash_read() API.
> Call spi_flash_read(), if supported, to make use of such interface.
>
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
> ---
>
> Resend v5:
> Rebased on top of v4.6-rc1
> v5: http://www.spinics.net/lists/devicetree/msg106696.html
>
> drivers/mtd/devices/m25p80.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c9c3b7fa3051..7730e633d7d3 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -131,6 +131,26 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
> /* convert the dummy cycles to the number of bytes */
> dummy /= 8;
>
> + if (spi_flash_read_supported(spi)) {
> + struct spi_flash_read_message msg;
> + int ret;
> +
> + msg.buf = buf;
> + msg.from = from;
> + msg.len = len;
> + msg.read_opcode = nor->read_opcode;
> + msg.addr_width = nor->addr_width;
> + msg.dummy_bytes = dummy;
> + /* TODO: Support other combinations */
> + msg.opcode_nbits = SPI_NBITS_SINGLE;
> + msg.addr_nbits = SPI_NBITS_SINGLE;
> + msg.data_nbits = m25p80_rx_nbits(nor);
> +
> + ret = spi_flash_read(spi, &msg);
> + *retlen = msg.retlen;

This is wrong. The previous retlen is never passed into msg so it must
be added and not assigned as is seen a few lines below:

ret = m.actual_length - m25p_cmdsz(nor) - dummy;
if (ret < 0)
return -EIO;
*retlen += ret;

This interface with odd design and poor documentation will be
hopefully weeded out with
mtd: spi-nor: stop passing around retlen
so there is probably no need to patch this separately.

Thanks

Michal