[RFC 3/8] usb: chipidea: msm: remove open-coded phy init

[Arnd Bergmann]

After commit 233c7daf4eec ("usb: chipidea: msm: Initialize PHY on reset
event"), we always call usb_phy_init() when receiving a
CI_HDRC_CONTROLLER_RESET_EVENT event, but we also set the
USB_AHBBURST and USB_AHBMODE registers to the same values that
the reset function does.

This removes the duplicate initialization, to avoid the dependency
on the header file and the phy registers.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/usb/chipidea/ci_hdrc_msm.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 3889809fd0c4..7cae571d15f8 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -8,15 +8,12 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/usb/msm_hsusb_hw.h>
 #include <linux/usb/ulpi.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/chipidea.h>
 
 #include "ci.h"
 
-#define MSM_USB_BASE	(ci->hw_bank.abs)
-
 static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 {
 	struct device *dev = ci->gadget.dev.parent;
@@ -24,9 +21,6 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 	switch (event) {
 	case CI_HDRC_CONTROLLER_RESET_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
-		writel(0, USB_AHBBURST);
-		/* use AHB transactor, allow posted data writes */
-		writel(0x8, USB_AHBMODE);
 		usb_phy_init(ci->usb_phy);
 		break;
 	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
-- 
2.7.0