[RFC 1/8] usb: phy: move msm_hsusb.h into driver

[Arnd Bergmann]

As a preparation for another cleanup, this moves the header file
for the phy-msm-usb driver into the driver itself. No other file
includes it any more, and we don't really want it in the global
namespace anyway.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/usb/phy/phy-msm-usb.c | 178 ++++++++++++++++++++++++++++++++++++-
 include/linux/usb/msm_hsusb.h | 200 ------------------------------------------
 2 files changed, 177 insertions(+), 201 deletions(-)
 delete mode 100644 include/linux/usb/msm_hsusb.h

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 72b387d592c2..8a34759727bb 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/extcon.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -35,6 +36,8 @@
 #include <linux/of_device.h>
 #include <linux/reboot.h>
 #include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
 
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
@@ -42,10 +45,183 @@
 #include <linux/usb/ulpi.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb.h>
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY			Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+	INVALID_PHY = 0,
+	CI_45NM_INTEGRATED_PHY,
+	SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX	1500
+#define IUNIT		100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *                              process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *                              between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *                              between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER	Invalid USB charger.
+ * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
+ *                      on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
+ *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+	USB_INVALID_CHARGER = 0,
+	USB_SDP_CHARGER,
+	USB_DCP_CHARGER,
+	USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ *              "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	int phy_init_sz;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_dr_mode mode;
+	enum otg_control_type otg_control;
+	enum msm_usb_phy_type phy_type;
+	void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_usb_cable - structure for exteternal connector cable
+ *			  state tracking
+ * @nb: hold event notification callback
+ * @conn: used for notification registration
+ */
+struct msm_usb_cable {
+	struct notifier_block		nb;
+	struct extcon_dev		*extcon;
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ *               detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ *	and controller driver therefore enables pull-up explicitly before
+ *	starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
+ * @switch_gpio: Descriptor for GPIO used to control external Dual
+ *               SPDT USB Switch.
+ * @reboot: Used to inform the driver to route USB D+/D- line to Device
+ *	    connector
+ */
+struct msm_otg {
+	struct usb_phy phy;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+	unsigned cur_power;
+	int phy_number;
+	struct delayed_work chg_work;
+	enum usb_chg_state chg_state;
+	enum usb_chg_type chg_type;
+	u8 dcd_retries;
+	struct regulator *v3p3;
+	struct regulator *v1p8;
+	struct regulator *vddcx;
+
+	struct reset_control *phy_rst;
+	struct reset_control *link_rst;
+	int vdd_levels[3];
+
+	bool manual_pullup;
+
+	struct msm_usb_cable vbus;
+	struct msm_usb_cable id;
+
+	struct gpio_desc *switch_gpio;
+	struct notifier_block reboot;
+};
+
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"
 
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
deleted file mode 100644
index 8c8f6854c993..000000000000
--- a/include/linux/usb/msm_hsusb.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@xxxxxxxxxx>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/extcon.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-#include <linux/clk.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_usb_cable - structure for exteternal connector cable
- *			  state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
-	struct notifier_block		nb;
-	struct extcon_dev		*extcon;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct msm_usb_cable vbus;
-	struct msm_usb_cable id;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#endif
-- 
2.7.0