Re: [PATCH] ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards

[Krzysztof Kozlowski]

On 05/19/2016 11:52 PM, Javier Martinez Canillas wrote:
> The regulator always-on property should only be used for regulators
> that either can't be disabled or the drivers for the client devices
> are not enabling the regulator and so being disabled due to unused.
> 
> There are some max77802 regulators in the Peach Pit and Pi boards
> that are always-on but shouldn't since they are enabled by drivers:
> 
> BUCK5 is max77802 inl1 supply
> BUCK7 is max77802 inl{2,10} supply
> BUCK9 is max77802 inl{3,4,5,7} supply
> BUCK10 is mmc1 vqmmc supply
> LDO9 is adc vdd supply
> 
> This patch removes the always-on property for these regulators.
> 
> Some regulators should remain always-on even when they are used as
> input supplies, because these regulators are also used by other
> components that are not described in the DT, for example:
> 
> LDO10 is hdmi vdd_osc supply but it's also used as input supply for
> the Exynos5420 temperature sensor.
> 
> LDO8 is hdmi vdd and vdd_pll supply but it's also used as supply for
> the Exynos5420 Display port.
> 
> BUCK2 and BUCK6 are the vdd supplies for the EAGLE and KFC clusters.
> 
> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> ---
> 
>  arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 -----
>  arch/arm/boot/dts/exynos5800-peach-pi.dts  | 5 -----
>  2 files changed, 10 deletions(-)

Thanks, applied.

Best regards,
Krzysztof